Skip to main content
Vulnerability Database/CVE-2026-100298

CVE-2026-100298: Anjvision YSSD-RTMP-H5 Information Disclosure

CVE-2026-100298 is an information disclosure vulnerability in Anjvision YSSD-RTMP-H5 firmware that exposes sensitive device and account data through user-information endpoints. This article covers technical details, affected versions, potential impact, and recommended mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-100298 Overview

CVE-2026-100298 affects Anjvision YSSD-RTMP-H5 firmware version 3.3.2.4. Two user-information endpoints expose sensitive device and account details under conditions that fall outside intended operation. The flaw maps to [CWE-522: Insufficiently Protected Credentials]. An authenticated attacker with low privileges on the network can retrieve data that should remain restricted, undermining device confidentiality and integrity.

Critical Impact

Network-adjacent attackers with low-privileged access can extract account credentials and device information from exposed endpoints, enabling account takeover and further compromise of the affected IP camera firmware.

Affected Products

  • Anjvision YSSD-RTMP-H5 firmware version 3.3.2.4
  • IP camera / RTMP streaming devices running the affected firmware image
  • Deployments referenced in CISA ICS Advisory ICSA-26-272-05

Discovery Timeline

Technical Details for CVE-2026-100298

Vulnerability Analysis

The vulnerability resides in two user-information endpoints exposed by the YSSD-RTMP-H5 firmware. These endpoints return sensitive device metadata and account details when queried under conditions not intended for normal use. The exposure includes credential material covered by [CWE-522], meaning stored or transmitted authentication data lacks sufficient protection.

An attacker who reaches the device over the network with low-privileged credentials can invoke the endpoints and harvest information typically restricted to administrative flows. Because the endpoints belong to normal HTTP-based management functionality, exploitation does not require kernel access, memory corruption primitives, or user interaction.

The result is a full compromise of confidentiality, integrity, and availability of device data. Recovered credentials support privilege escalation on the device itself and lateral movement to any system reusing the same account material.

Root Cause

The firmware exposes user-information endpoints that either miss authorization checks or return protected fields in responses intended for lower-trust contexts. Credential data is transmitted or serialized without sufficient protection, matching the [CWE-522] pattern of insufficiently protected credentials.

Attack Vector

Exploitation is remote over the network and requires only low privileges. An attacker sends crafted requests to the vulnerable user-information endpoints on the device management interface. Responses disclose account and device information that the attacker uses to authenticate as a higher-privileged user or to pivot into adjacent systems. No user interaction is required.

No public proof-of-concept has been published, and the vulnerability is not listed in the CISA Known Exploited Vulnerabilities catalog. Refer to CISA ICS Advisory ICSA-26-272-05 for vendor-coordinated technical detail.

Detection Methods for CVE-2026-100298

Indicators of Compromise

  • Unexpected HTTP GET or POST requests to user-information endpoints on YSSD-RTMP-H5 devices originating from non-administrative hosts.
  • Authentication events using device-local accounts from source addresses that do not match approved management workstations.
  • Bursts of low-privileged sessions followed by configuration or credential changes on the camera.

Detection Strategies

  • Inspect device HTTP access logs for repeated requests to user or account information paths outside scheduled administrative windows.
  • Correlate low-privileged logins to the camera management interface with subsequent access to sensitive endpoints.
  • Alert on device management traffic sourced from network segments that should not reach the camera control plane.

Monitoring Recommendations

  • Forward camera and network device logs to a centralized analytics platform for cross-source correlation and long-term retention.
  • Baseline expected management traffic to YSSD-RTMP-H5 devices and alert on deviations in source, volume, or endpoint path.
  • Monitor for reuse of credentials recovered from the camera on domain accounts, VPN gateways, and cloud identity providers.

How to Mitigate CVE-2026-100298

Immediate Actions Required

  • Restrict network reachability of YSSD-RTMP-H5 management interfaces to dedicated administrative VLANs and jump hosts.
  • Rotate all local device credentials and any shared credentials reused elsewhere in the environment.
  • Audit device accounts and remove unused or default users that could be leveraged for the low-privileged access required by this flaw.

Patch Information

No fixed firmware version is enumerated in the NVD entry at time of publication. Consult CISA ICS Advisory ICSA-26-272-05 for vendor guidance and apply any firmware update published by Anjvision for YSSD-RTMP-H5 above version 3.3.2.4 as soon as it becomes available.

Workarounds

  • Place affected cameras behind a firewall that blocks direct client access to the HTTP management interface.
  • Terminate management traffic through a reverse proxy that enforces authentication and rate limiting before requests reach the device.
  • Disable remote management features that are not required for operational use and require VPN access for administrative sessions.
bash
# Example: restrict access to the camera management interface to a trusted subnet
iptables -A INPUT -p tcp --dport 80 -s 10.10.20.0/24 -j ACCEPT
iptables -A INPUT -p tcp --dport 80 -j DROP
iptables -A INPUT -p tcp --dport 443 -s 10.10.20.0/24 -j ACCEPT
iptables -A INPUT -p tcp --dport 443 -j DROP

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.