Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB
CVE-2026-100297 Overview
CVE-2026-100297 is a Server-Side Request Forgery (SSRF) vulnerability in Anjvision YSSD-RTMP-H5 firmware version 3.3.2.4. An unauthenticated network check function on the device can be abused to probe arbitrary hosts reachable from the device's internal network. Attackers can leverage the flaw to enumerate internal infrastructure or exfiltrate data through Domain Name System (DNS) queries. The weakness is classified as [CWE-918] Server-Side Request Forgery and requires no authentication or user interaction.
Critical Impact
Unauthenticated remote attackers can pivot through affected devices to probe internal networks and leak information via outbound DNS queries.
Affected Products
- Anjvision YSSD-RTMP-H5 firmware version 3.3.2.4
Discovery Timeline
- 2026-09-29 - CVE-2026-100297 published to the National Vulnerability Database (NVD)
- 2026-09-29 - Last updated in the NVD database
- ICSA-26-272-05 - Referenced in the CISA Industrial Control Systems (ICS) advisory CISA ICS Advisory ICSA-26-272-05
Technical Details for CVE-2026-100297
Vulnerability Analysis
The Anjvision YSSD-RTMP-H5 device exposes a network check function without authentication. This function accepts an attacker-controlled host or address and issues an outbound request from the device itself. Because the request originates on the device, it can reach systems on the internal network that would otherwise be unreachable from the internet.
The vulnerability enables two primary abuses. Attackers can perform internal reconnaissance by observing timing or response differences when probing internal IP addresses and ports. Attackers can also exfiltrate data by supplying attacker-controlled hostnames, forcing the device's resolver to issue DNS lookups that carry encoded information to an external authoritative name server.
Root Cause
The root cause is missing input validation and missing authentication on a diagnostic network check endpoint. The endpoint accepts arbitrary destinations without restricting them to trusted ranges, and it does not require credentials before performing the outbound probe. This matches the pattern described in [CWE-918].
Attack Vector
Exploitation occurs over the network. An attacker sends a crafted request to the network check function on the exposed device and specifies a target host, IP address, or DNS name. The device performs the probe on the attacker's behalf and, depending on the response channel, returns observable results or emits DNS traffic that the attacker can monitor. No authentication, privileges, or user interaction are required.
Verified proof-of-concept code is not publicly available. Refer to the CISA ICS Advisory ICSA-26-272-05 for additional technical context.
Detection Methods for CVE-2026-100297
Indicators of Compromise
- Outbound HTTP or Internet Control Message Protocol (ICMP) traffic from the YSSD-RTMP-H5 device to internal IP ranges that the device does not normally contact.
- Recursive DNS queries originating from the device for unusual, attacker-controlled, or encoded subdomains.
- Unexpected HTTP requests to the device's diagnostic or network check endpoint from external sources.
Detection Strategies
- Baseline normal outbound destinations for the device and alert on deviations, particularly probes targeting RFC1918 ranges.
- Inspect DNS logs for high-entropy or long subdomain labels that indicate data encoding for exfiltration.
- Correlate inbound HTTP requests to the device with immediately following outbound probes to the same or related targets.
Monitoring Recommendations
- Forward device network logs and upstream firewall logs to a centralized analytics platform for correlation.
- Monitor internal DNS resolvers for queries sourced from IoT and camera subnets.
- Alert on any successful TCP connection from the device to management interfaces on servers, hypervisors, or network equipment.
How to Mitigate CVE-2026-100297
Immediate Actions Required
- Restrict inbound network access to the YSSD-RTMP-H5 management and diagnostic interfaces using firewall rules or access control lists.
- Place affected devices on an isolated VLAN with no route to sensitive internal systems.
- Constrain the DNS resolvers the device can reach and block direct outbound DNS to the internet.
Patch Information
No vendor patch is referenced in the NVD entry at the time of publication. Consult the CISA ICS Advisory ICSA-26-272-05 for vendor guidance and any subsequent firmware updates for Anjvision YSSD-RTMP-H5.
Workarounds
- Block all inbound requests to the device's network check endpoint at the perimeter and internal segmentation firewalls.
- Deny outbound traffic from the device except to explicitly required streaming or management endpoints.
- Disable or filter recursive DNS lookups from the device subnet to prevent DNS-based exfiltration.
# Configuration example
# Example iptables rules to segment an affected device (replace <DEVICE_IP>)
iptables -A FORWARD -s <DEVICE_IP> -d 10.0.0.0/8 -j DROP
iptables -A FORWARD -s <DEVICE_IP> -d 172.16.0.0/12 -j DROP
iptables -A FORWARD -s <DEVICE_IP> -d 192.168.0.0/16 -j DROP
iptables -A FORWARD -s <DEVICE_IP> -p udp --dport 53 -j DROP
Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB

