Skip to main content
Vulnerability Database/CVE-2025-55280

CVE-2025-55280: ZKTeco WL20 Information Disclosure Flaw

CVE-2025-55280 is an information disclosure vulnerability in ZKTeco WL20 devices that stores Wi-Fi credentials and configuration data in plaintext. This post explains its impact, affected versions, and mitigation steps.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2025-55280 Overview

CVE-2025-55280 affects the ZKTeco WL20 device due to plaintext storage of Wi-Fi credentials, configuration data, and system data within the device firmware. An attacker with physical access can extract the firmware image and reverse engineer the binary to recover sensitive data. Successful exploitation allows unauthorized network access and data manipulation on the targeted device. The weakness maps to [CWE-312: Cleartext Storage of Sensitive Information].

Critical Impact

Physical access to a ZKTeco WL20 unit enables recovery of plaintext Wi-Fi credentials and configuration data, exposing the surrounding network to unauthorized access.

Affected Products

  • ZKTeco WL20 (firmware-level issue, per CERT-In advisory)

Discovery Timeline

  • 2025-08-13 - CVE-2025-55280 published to NVD
  • 2026-06-17 - Last updated in NVD database

Technical Details for CVE-2025-55280

Vulnerability Analysis

The ZKTeco WL20 stores sensitive operational data without encryption inside its firmware image. An attacker who physically acquires a device can dump the flash contents using standard hardware techniques such as chip-off extraction, UART debug interfaces, or SPI readers. Once the firmware image is obtained, static analysis of the binary reveals Wi-Fi SSIDs, pre-shared keys, device configuration parameters, and system metadata in cleartext.

Recovered Wi-Fi credentials provide a pivot into the adjacent wireless network. Configuration data can be modified and reflashed to the device, altering access control behavior or system state. The exposure is limited to attackers with hands-on access, but the impact extends beyond the device because recovered credentials often work against the broader network.

Root Cause

The root cause is the absence of encryption or secure element storage for sensitive values on the device. The firmware embeds credentials and configuration data directly in readable sections of the flash image rather than protecting them with device-bound keys or a hardware security module.

Attack Vector

Exploitation requires physical possession of the ZKTeco WL20. The attacker extracts the firmware through a hardware debug port or by desoldering the flash chip, parses the binary with reverse engineering tools, and locates the plaintext credential strings. No authentication, user interaction, or network access is required during extraction.

No verified proof-of-concept code is published for this issue. Refer to the CERT-In Vulnerability Note CIVN-2025-0172 for additional technical context.

Detection Methods for CVE-2025-55280

Indicators of Compromise

  • Unexplained physical tampering of ZKTeco WL20 enclosures, including removed screws, pry marks, or opened cases.
  • Unknown wireless clients authenticating to the Wi-Fi network using the credentials provisioned on WL20 devices.
  • Unexpected configuration changes or firmware version mismatches on deployed WL20 units.

Detection Strategies

  • Audit wireless controller logs for new or anomalous MAC addresses associating with the SSID shared by WL20 devices.
  • Monitor the network segment reachable from the WL20 Wi-Fi profile for lateral movement or reconnaissance traffic.
  • Perform periodic physical inspections and chain-of-custody checks on deployed devices.

Monitoring Recommendations

  • Forward wireless authentication events and DHCP logs to a central analytics platform for correlation.
  • Alert on any device administration or configuration change originating from the WL20 management interface outside maintenance windows.
  • Track firmware integrity through scheduled hash comparisons against a known-good baseline.

How to Mitigate CVE-2025-55280

Immediate Actions Required

  • Restrict physical access to ZKTeco WL20 devices using tamper-evident enclosures and secured mounting.
  • Place WL20 devices on an isolated Wi-Fi SSID and VLAN with no route to sensitive corporate assets.
  • Rotate Wi-Fi credentials used by WL20 devices if there is any suspicion of physical compromise.

Patch Information

No vendor patch is referenced in the available data for CVE-2025-55280. Monitor the CERT-In Vulnerability Note CIVN-2025-0172 and ZKTeco vendor channels for firmware updates that address plaintext storage.

Workarounds

  • Deploy the WL20 only in physically controlled environments with surveillance and access logging.
  • Use a dedicated Wi-Fi network for the device with WPA2/WPA3-Enterprise where the WL20 cannot leak enterprise credentials.
  • Disable or firewall unused management interfaces exposed by the device to reduce the value of any recovered configuration data.
  • Maintain an asset inventory and immediately decommission any WL20 unit that leaves controlled custody.

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.