Skip to main content
Vulnerability Database/CVE-2025-55279

CVE-2025-55279: ZKTeco WL20 Information Disclosure Flaw

CVE-2025-55279 is an information disclosure vulnerability in ZKTeco WL20 due to hard-coded private keys stored in plaintext. Attackers with physical access can extract firmware to decrypt data and launch MitM attacks.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2025-55279 Overview

CVE-2025-55279 affects the ZKTeco WL20 device due to a hard-coded private key stored in plaintext within the device firmware [CWE-798]. An attacker with physical access can extract the firmware and analyze the binary data to retrieve the embedded private key.

Successful exploitation enables unauthorized decryption of sensitive data and Man-in-the-Middle (MitM) attacks against the targeted device. The vulnerability carries a CVSS 4.0 score of 6.9 (MEDIUM) with a physical attack vector requirement.

Critical Impact

Extraction of the hard-coded private key allows attackers to decrypt sensitive communications and intercept traffic across any WL20 device sharing the same firmware image.

Affected Products

  • ZKTeco WL20 device firmware
  • Devices sharing the same embedded private key material
  • Communications secured by the compromised key pair

Discovery Timeline

  • 2025-08-13 - CVE-2025-55279 published to NVD
  • 2026-06-17 - Last updated in NVD database

Technical Details for CVE-2025-55279

Vulnerability Analysis

The ZKTeco WL20 ships with a private cryptographic key embedded directly in its firmware image. The key is stored in plaintext, meaning no additional obfuscation or encryption layer protects it from static analysis. Any attacker who obtains the firmware binary can recover the key using standard reverse engineering tools.

Because the key is hard-coded, every device running the vulnerable firmware shares the same cryptographic material. Compromise of a single device therefore undermines the confidentiality guarantees of the entire fleet. Attackers can impersonate the device in TLS exchanges or decrypt previously captured ciphertext that relied on the key.

The weakness is classified under CWE-798 (Use of Hard-coded Credentials), a long-standing anti-pattern in embedded systems. The EPSS score of 0.174% reflects a low near-term probability of mass exploitation given the physical access requirement.

Root Cause

The root cause is a firmware build process that embeds a static private key into the shipped image rather than provisioning a unique key per device during manufacturing or first boot. The absence of secure key storage mechanisms such as a hardware security element or encrypted key vault compounds the issue.

Attack Vector

An attacker begins by acquiring physical access to a WL20 unit, then extracts the firmware through debug interfaces, flash chip read-off, or vendor update images. Static analysis of the firmware binary reveals the embedded private key. The attacker then uses the key to decrypt intercepted traffic or to position themselves as a Man-in-the-Middle between the device and its backend services.

For technical analysis details, see the CERT-IN Advisory CIVN-2025-0172.

Detection Methods for CVE-2025-55279

Indicators of Compromise

  • Unexpected TLS session terminations or certificate anomalies on traffic flows involving WL20 devices
  • Network traffic from the WL20 that is successfully decrypted or replayed by non-authorized endpoints
  • Evidence of physical tampering such as opened enclosures, exposed debug headers, or flash chip residue

Detection Strategies

  • Capture and inspect device-to-cloud traffic for protocol anomalies that indicate interception or replay
  • Compare firmware images extracted from deployed devices against vendor-provided hashes to confirm integrity
  • Monitor for duplicate certificate or key fingerprints across the device fleet, which indicate key reuse

Monitoring Recommendations

  • Log and alert on repeated or unexpected device reconnections to backend management services
  • Deploy network segmentation controls and inspect lateral traffic between WL20 devices and sensitive systems
  • Track physical security events for areas where WL20 units are deployed, including after-hours access

How to Mitigate CVE-2025-55279

Immediate Actions Required

  • Restrict physical access to WL20 devices and audit the physical security of all deployment locations
  • Isolate WL20 devices on dedicated network segments with strict egress filtering to limit MitM impact
  • Monitor the vendor advisory channel and the CERT-IN Advisory CIVN-2025-0172 for firmware updates

Patch Information

No vendor patch URL is listed in the available CVE data at the time of writing. Administrators should consult ZKTeco directly and reference the CERT-IN advisory for update availability. Once firmware with device-unique keys is released, prioritize deployment to any WL20 unit at risk of physical tampering.

Workarounds

  • Place WL20 devices in tamper-evident enclosures and apply tamper detection seals where feasible
  • Terminate device traffic at a trusted gateway that enforces mutual authentication with independently provisioned certificates
  • Decommission or replace devices that have shown evidence of physical compromise
bash
# Example network segmentation rule limiting WL20 egress to the management endpoint only
iptables -A FORWARD -s 10.20.30.0/24 -d mgmt.example.internal -p tcp --dport 443 -j ACCEPT
iptables -A FORWARD -s 10.20.30.0/24 -j DROP

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.