Skip to main content
Vulnerability Database/CVE-2026-84403

CVE-2026-84403: Botslab G980H Information Disclosure Flaw

CVE-2026-84403 is an information disclosure vulnerability in Botslab G980H dash camera firmware that exposes sensitive data through unauthenticated Bluetooth Low Energy access. This article covers technical details, impact, and mitigation.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-84403 Overview

CVE-2026-84403 is a missing authentication vulnerability in the Botslab G980H dash camera firmware. The device exposes Bluetooth Low Energy (BLE) communications and Generic Attribute Profile (GATT) characteristics without requiring authenticated pairing or client binding. An attacker within Bluetooth range can read sensitive data, including device identifiers, firmware information, and WiFi credentials intended to be protected. The weakness is tracked under [CWE-306: Missing Authentication for Critical Function].

Critical Impact

An unauthenticated attacker within BLE range can retrieve the dash camera's WiFi credentials and firmware metadata without any user interaction or prior pairing.

Affected Products

  • Botslab G980H dash camera
  • Botslab G980H firmware (BLE/GATT stack)
  • Devices relying on the Botslab G980H BLE pairing configuration

Discovery Timeline

  • 2026-09-24 - CVE-2026-84403 published to the National Vulnerability Database (NVD)
  • 2026-09-25 - Last updated in NVD database
  • ICSA-26-267-01 - CISA Industrial Control Systems advisory released (CISA ICS Advisory ICSA-26-267-01)

Technical Details for CVE-2026-84403

Vulnerability Analysis

The Botslab G980H firmware exposes BLE GATT services without enforcing authenticated pairing or client binding. GATT characteristics on the device can be queried and read by any BLE central device that connects. Because no bonding or Just Works verification is required, the attacker never proves possession of the physical device or user consent. Sensitive attributes, including stored WiFi Service Set Identifier (SSID) and pre-shared key values, are returned over the air.

The exposure allows adjacent attackers to enumerate device identifiers and firmware strings that aid further targeting. Recovered WiFi credentials extend the compromise beyond the dash camera to the user's home or vehicle hotspot network. Attackers can also passively intercept BLE traffic between the camera and legitimate mobile applications.

Root Cause

The root cause is a design-level omission: the BLE stack on the G980H does not require Security Mode 1 Level 2 or higher before honoring GATT read requests on sensitive characteristics. Characteristics storing credentials and configuration are marked readable without encryption or authentication permissions. This maps directly to [CWE-306], Missing Authentication for a Critical Function.

Attack Vector

Exploitation requires adjacent-network access over Bluetooth Low Energy. An attacker uses a standard BLE scanner such as bluetoothctl, nRF Connect, or gatttool to discover the camera, connect without pairing, enumerate services, and issue read requests against sensitive characteristic handles. No credentials, user interaction, or elevated privileges are needed. The attacker must stay within approximately 10 to 100 meters of the target depending on antenna configuration.

No verified public proof-of-concept code is available. See the CISA ICS Advisory ICSA-26-267-01 and the GitHub CSAF JSON File for authoritative technical details.

Detection Methods for CVE-2026-84403

Indicators of Compromise

  • Unexpected BLE central devices appearing in the vicinity of the dash camera during idle periods
  • Unfamiliar WiFi clients joining the SSID stored on the G980H shortly after the vehicle is parked in a public area
  • Mobile companion app reporting an unexpected active BLE connection or session reset

Detection Strategies

  • Monitor wireless spectrum near parked vehicles for repeated BLE connection attempts targeting the G980H manufacturer identifier
  • Review home or hotspot router logs for new MAC addresses associating with the SSID known to be provisioned on the camera
  • Correlate camera firmware diagnostic logs, where available, with unexplained GATT read activity

Monitoring Recommendations

  • Enable WiFi client isolation on networks that share credentials with the dash camera to limit lateral movement
  • Alert on new device joins to the camera's associated WiFi network outside expected hours
  • Track CISA advisory updates for firmware availability by subscribing to CISA ICS Advisories

How to Mitigate CVE-2026-84403

Immediate Actions Required

  • Disable Bluetooth on the Botslab G980H dash camera when pairing with the mobile application is not actively required
  • Rotate the WiFi credentials that were provisioned to the camera and segment the camera onto an isolated SSID
  • Keep the camera powered off in untrusted public areas until vendor firmware addressing the issue is installed

Patch Information

At the time of publication, no vendor patch is referenced in the NVD entry. Monitor the BotsLab vendor site and the CISA ICS Advisory ICSA-26-267-01 for firmware updates that enforce authenticated BLE pairing and bonded GATT access.

Workarounds

  • Provision the dash camera with a dedicated WiFi SSID and pre-shared key that are not reused on any other network
  • Operate the camera with Bluetooth disabled outside of initial setup to remove the attack surface
  • Physically remove or power off the device when the vehicle is parked in high-density public environments
bash
# Example: isolate the dash camera on a dedicated SSID (OpenWrt syntax)
uci set wireless.dashcam=wifi-iface
uci set wireless.dashcam.network='dashcam_vlan'
uci set wireless.dashcam.ssid='DashCam-Isolated'
uci set wireless.dashcam.encryption='psk2'
uci set wireless.dashcam.isolate='1'
uci commit wireless
wifi reload

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.