Skip to main content
Vulnerability Database/CVE-2026-75558

CVE-2026-75558: Botslab G980H Hard-Coded Key Vulnerability

CVE-2026-75558 is an information disclosure flaw in Botslab G980H dash camera firmware that exposes WiFi credentials through hard-coded cryptographic keys. This post explains its impact, affected versions, and mitigation steps.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-75558 Overview

CVE-2026-75558 affects the Botslab G980H dash camera firmware. The device uses a hard-coded cryptographic key and initialization vector (IV) to protect WiFi credentials transmitted by the camera. An attacker who captures the protected credential and extracts the cryptographic material from the firmware can decrypt the WiFi password. This recovery grants unauthorized access to the device network. The weakness is classified under CWE-321: Use of Hard-coded Cryptographic Key.

Critical Impact

Recovery of plaintext WiFi credentials from the Botslab G980H dash camera enables an adjacent-network attacker to join the device's WiFi network without authorization.

Affected Products

Discovery Timeline

  • 2026-09-24 - CVE-2026-75558 published to the National Vulnerability Database (NVD)
  • 2026-09-25 - Last updated in NVD database

Technical Details for CVE-2026-75558

Vulnerability Analysis

The Botslab G980H firmware embeds a static Advanced Encryption Standard (AES) key and initialization vector in the device image. The firmware uses these fixed values to encrypt WiFi credentials exchanged during device setup and operation. Because the key material is identical across every device shipped with the same firmware, encryption provides no meaningful confidentiality once the key is recovered from a single unit.

An attacker with access to the firmware binary can locate the key and IV through static analysis. The attacker can then decrypt any intercepted credential blob produced by any device running that firmware. The vulnerability is scoped to adjacent-network exposure because the attacker must first capture the encrypted credential traffic within radio range of the device.

Root Cause

The root cause is the use of a hard-coded cryptographic key, which maps to CWE-321. The firmware does not derive per-device key material and does not rotate the key or IV. Reusing a fixed IV with a static key also undermines the semantic security properties of the cipher mode.

Attack Vector

The attack requires adjacent-network access. An attacker within WiFi range captures the encrypted credential exchange between the camera and a paired client. The attacker extracts the hard-coded key and IV from a copy of the G980H firmware, then decrypts the captured ciphertext offline. The recovered WiFi password permits the attacker to join the device network and interact with the camera directly.

No verified exploitation code is published for this issue. See the CISA ICS Advisory ICSA-26-267-01 and the GitHub CSAF file for coordinated disclosure details.

Detection Methods for CVE-2026-75558

Indicators of Compromise

  • Unexpected client associations on the dash camera's WiFi service set identifier (SSID) from unknown MAC addresses.
  • WiFi probe or association requests originating from devices that have never been provisioned by the owner.
  • Repeated capture attempts or deauthentication frames in the vicinity of the vehicle or device.

Detection Strategies

  • Monitor the camera's WiFi association logs, where available, for new or anomalous client connections.
  • Inspect firmware images for the presence of static key material matching the pattern described in ICSA-26-267-01.
  • Correlate adjacent-network reconnaissance activity, such as sustained 802.11 monitor-mode captures, with device access events.

Monitoring Recommendations

  • Alert on repeated failed and successful associations to the device SSID within short time windows.
  • Track firmware version strings on managed camera fleets to confirm patch state once a vendor update is published.
  • Record and review radio-frequency (RF) activity near installations in sensitive environments.

How to Mitigate CVE-2026-75558

Immediate Actions Required

  • Change the WiFi password on the Botslab G980H to a long, random value after any suspected credential capture.
  • Disable the camera's WiFi service when not actively required for configuration or data transfer.
  • Restrict physical and RF proximity to the device in deployments where credential interception is plausible.

Patch Information

No vendor patch is referenced in the published advisory data for CVE-2026-75558. Monitor the CISA ICS Advisory ICSA-26-267-01 and the BotsLab vendor site for firmware updates that replace the hard-coded key with per-device key material.

Workarounds

  • Operate the camera on an isolated WiFi segment that does not bridge to other trusted networks.
  • Pair the device only in controlled environments where adjacent-network capture is unlikely.
  • Treat the current WiFi password as compromised and rotate it on a defined schedule until a firmware fix is available.
bash
# Example: isolate the camera on a dedicated SSID with client isolation enabled
# (configuration syntax varies by access point vendor)
ssid "g980h-isolated"
vlan 42
client-isolation enable
wpa3-sae passphrase "<long-random-passphrase>"

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.