Skip to main content
Vulnerability Database/CVE-2026-82566

CVE-2026-82566: Botslab G980H Auth Bypass Vulnerability

CVE-2026-82566 is an authentication bypass flaw in Botslab G980H dash camera firmware that allows attackers to exploit residual session states. This post covers the technical details, affected versions, and mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-82566 Overview

The Botslab G980H dash camera firmware contains a session management vulnerability tracked as CVE-2026-82566. Authentication state can remain valid after the associated client connection has been terminated or replaced. A newly established connection can displace an existing client while previously established session state persists until a separate expiration mechanism invalidates it. An unauthenticated attacker with adjacent network access could abuse this residual authentication state to access functionality tied to another client's session. The weakness maps to CWE-613: Insufficient Session Expiration.

Critical Impact

Adjacent attackers can inherit another user's authenticated session on the dash camera, gaining access to device functionality without presenting valid credentials.

Affected Products

  • Botslab G980H dash camera firmware
  • Devices exposing the vulnerable session management interface on adjacent networks
  • Deployments where connection replacement occurs without invalidating prior session state

Discovery Timeline

  • 2026-09-24 - CVE-2026-82566 published to the National Vulnerability Database (NVD)
  • 2026-09-24 - Last updated in NVD database
  • 2026-09-24 - CISA ICS Advisory ICSA-26-267-01 released

Technical Details for CVE-2026-82566

Vulnerability Analysis

The flaw sits in how the G980H firmware tracks authenticated sessions relative to client transport connections. Session state is bound to a logical session object rather than the underlying client connection. When a new client connects and displaces an active client, the firmware tears down the previous connection but leaves the authenticated session object alive. That session remains valid until an independent timeout fires. During this window, the new client can issue requests that the firmware services under the previous client's authenticated context.

Because the attacker only needs adjacent network access and no credentials, exploitation does not require prior compromise of the owner's account. The impact extends to confidentiality, integrity, and availability of device functionality associated with the hijacked session.

Root Cause

The root cause is insufficient session expiration ([CWE-613]). The firmware does not invalidate the authentication state when the client connection ends or is displaced. Session lifetime is governed only by a time-based expiration mechanism that is decoupled from connection lifecycle events.

Attack Vector

An attacker on the same adjacent network as the dash camera initiates a connection that displaces a legitimate authenticated client. The displacement path does not require authentication. Once connected, the attacker issues requests that are processed under the residual authenticated session until the independent expiration timer fires.

No verified public proof-of-concept code is available for CVE-2026-82566. Technical specifics should be reviewed in the CISA ICS Advisory #26-267-01 and the corresponding CSAF data file.

Detect Identity Attacks the Moment Authentication Fails

Singularity™ Identity surfaces credential misuse, lateral movement, and privilege escalation in real time, so you can contain the breach before it spreads.

Stop Identity Attacks

Detection Methods for CVE-2026-82566

Indicators of Compromise

  • Dash camera client sessions that transition between source addresses without an intervening authentication exchange.
  • Device command activity continuing immediately after a legitimate client disconnects from the camera network.
  • Multiple distinct wireless clients associating with the camera's access interface in rapid succession.

Detection Strategies

  • Capture traffic to and from the camera's management interface and alert when authenticated requests originate from a client that did not perform the preceding login handshake.
  • Correlate client association events on the camera's Wi-Fi interface with session identifiers observed in application-layer traffic.
  • Flag session identifiers reused across differing MAC or IP endpoints within a short time window.

Monitoring Recommendations

  • Monitor the wireless segment hosting the dash camera for unexpected client associations and deauthentication events.
  • Log and review all administrative actions issued to the camera, including configuration changes and media access requests.
  • Alert on connections to the camera originating from outside the expected device inventory.

How to Mitigate CVE-2026-82566

Immediate Actions Required

  • Restrict adjacent network access to the dash camera by isolating it on a dedicated SSID or VLAN with strong Wi-Fi credentials.
  • Disable the camera's wireless management interface when not actively in use.
  • Inventory deployed Botslab G980H units and confirm firmware versions against vendor guidance.

Patch Information

No vendor patch URL is listed in the enriched CVE data at the time of publication. Review the CISA ICS Advisory #26-267-01 for the latest mitigation guidance from the vendor and CISA, and consult the Botslab company page for firmware update channels.

Workarounds

  • Terminate the camera's wireless interface after each legitimate session to force session state cleanup through power or interface cycling.
  • Reduce the session expiration window on supporting devices to limit the residual authentication exposure period.
  • Avoid connecting to the dash camera from untrusted locations where other wireless clients can observe or interact with the device.
bash
# Example: isolate the dash camera on a dedicated SSID with WPA3 and client isolation
# (apply equivalent settings on your access point management interface)
ssid="dashcam-mgmt"
band="5GHz"
security="wpa3-sae"
client_isolation="enabled"
broadcast_ssid="disabled"
allowed_clients="<owner-device-mac>"

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.