Skip to main content
Vulnerability Database/CVE-2026-76744

CVE-2026-76744: AOS-S Buffer Overflow RCE Vulnerability

CVE-2026-76744 is a buffer overflow vulnerability in AOS-S that enables unauthenticated remote attackers to execute arbitrary code. This article covers the technical details, security impact, and mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-76744 Overview

CVE-2026-76744 is a buffer overflow vulnerability in the affected interface of HPE Aruba Networking AOS-S. An unauthenticated remote attacker can exploit the flaw to execute arbitrary code on affected switches. The vulnerability requires no privileges and no user interaction, exposing network infrastructure to full compromise. HPE has published a security advisory describing the issue and the fixed software versions.

Critical Impact

Unauthenticated remote attackers can execute arbitrary code on AOS-S devices, resulting in full compromise of confidentiality, integrity, and availability of affected network switches.

Affected Products

  • HPE Aruba Networking AOS-S switch software
  • See the HPE Support Document for the complete list of affected AOS-S versions
  • Specific hardware models and build numbers are enumerated in the vendor advisory

Discovery Timeline

  • 2026-10-06 - CVE-2026-76744 published to the National Vulnerability Database
  • 2026-10-07 - Last updated in NVD database

Technical Details for CVE-2026-76744

Vulnerability Analysis

The vulnerability is a memory corruption flaw in a network-reachable interface of AOS-S. Attacker-controlled input is copied into a fixed-size buffer without adequate bounds checking. The resulting overflow corrupts adjacent memory and can be leveraged to redirect execution flow into attacker-supplied code.

Because AOS-S runs on managed switches, successful exploitation grants control over device forwarding behavior, management plane configuration, and credential material stored on the device. Compromised switches can be used to pivot into segmented networks, intercept traffic, or disable security controls.

The advisory classifies the issue as a buffer overflow [CWE-120 class]. HPE's bulletin references the affected interface and the specific software trains receiving fixes.

Root Cause

The root cause is insufficient input validation when the vulnerable interface processes incoming network data. A length field or input size is not validated against the destination buffer capacity before the data is copied. This permits an attacker to write past the buffer boundary into adjacent process memory.

Attack Vector

Exploitation occurs over the network against the exposed AOS-S management or protocol interface. The attacker does not need credentials or interaction from any user. Any network path that reaches the vulnerable interface is sufficient, which makes exposed management planes and flat Layer 2 segments the primary risk zones.

No public proof-of-concept exploit code is referenced in the available advisory data. The EPSS probability is reported at 0.51%, but the pre-authentication network attack surface warrants priority remediation regardless of current exploit telemetry.

Stop Remote Code Execution Before It Runs

Singularity™ Endpoint detects and blocks exploit attempts at machine speed, including zero-days and novel attack techniques.

Stop Exploit Attempts

Detection Methods for CVE-2026-76744

Indicators of Compromise

  • Unexpected reboots, crashes, or process restarts on AOS-S switches without a corresponding administrative action
  • New or modified local accounts, SNMP communities, or TACACS/RADIUS settings on affected devices
  • Unexpected outbound connections from switch management interfaces to unknown hosts
  • Anomalous configuration changes or firmware integrity mismatches reported by device health checks

Detection Strategies

  • Monitor syslog streams from AOS-S devices for crash dumps, watchdog resets, and stack trace entries tied to the affected interface
  • Alert on unauthenticated connection attempts to switch management services from non-management subnets
  • Baseline normal management-plane traffic and flag deviations in source IP, protocol, or packet size

Monitoring Recommendations

  • Forward AOS-S logs and SNMP traps into a centralized SIEM for correlation across the switching fabric
  • Enable NetFlow or sFlow on uplinks to detect scanning or protocol fuzzing targeting switch management addresses
  • Verify running firmware versions across the estate on a scheduled basis and compare against the HPE fixed-version list

How to Mitigate CVE-2026-76744

Immediate Actions Required

  • Inventory all AOS-S switches and identify versions against the HPE advisory
  • Apply the HPE-supplied firmware updates to every affected switch as the primary remediation
  • Restrict the vulnerable interface to a dedicated out-of-band management network until patching is complete
  • Rotate local credentials, SNMP strings, and shared secrets on any device suspected of exposure

Patch Information

HPE has published fixed AOS-S software versions in the HPE Support Document. Administrators should review the advisory for the exact fixed train that corresponds to each deployed switch model and upgrade accordingly. No vendor-sanctioned configuration-only fix replaces the firmware update.

Workarounds

  • Place switch management interfaces on an isolated VLAN reachable only from administrative jump hosts
  • Apply ACLs on management interfaces to permit traffic only from known administrator source addresses
  • Disable the affected interface or protocol on devices where it is not operationally required, per vendor guidance
  • Monitor for and block unexpected traffic to switch management IPs at upstream firewalls
bash
# Example: restrict management access on AOS-S using an ACL
# Replace 10.10.10.0/24 with your administrative subnet
configure terminal
ip access-list extended MGMT-ONLY
 10 permit tcp 10.10.10.0 0.0.0.255 any eq 22
 20 permit tcp 10.10.10.0 0.0.0.255 any eq 443
 30 deny ip any any log
exit
vlan 10
 ip access-group MGMT-ONLY in
exit
write memory

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.