Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB
CVE-2026-76746 Overview
CVE-2026-76746 is an unauthenticated buffer overflow vulnerability in HPE Aruba Networking AOS-S switch software. An adjacent network attacker can trigger the flaw without credentials or user interaction. Successful exploitation exposes sensitive memory contents and causes a denial of service on the affected device.
The vulnerability carries a CVSS 3.1 base score of 9.3 with a scope change, meaning impact extends beyond the vulnerable component. HPE published the issue in security bulletin hpesbnw05156en_us.
Critical Impact
An unauthenticated adjacent attacker can crash AOS-S switches and leak memory contents, disrupting network availability and potentially exposing configuration or session data.
Affected Products
- HPE Aruba Networking AOS-S switch software (see HPE bulletin hpesbnw05156en_us for affected versions)
- Switch platforms running vulnerable AOS-S firmware
- Networks exposing management or data-plane services to adjacent Layer 2 segments
Discovery Timeline
- 2026-10-06 - CVE-2026-76746 published to the National Vulnerability Database
- 2026-10-07 - Last updated in NVD database
Technical Details for CVE-2026-76746
Vulnerability Analysis
The flaw is a classic buffer overflow [CWE-121] in a network-facing component of AOS-S. The affected code path processes attacker-controlled input without enforcing proper length validation. Writing past the destination buffer corrupts adjacent memory structures, which can both leak residual memory content back to the attacker and crash the switch firmware.
The CVSS vector indicates confidentiality and availability impact without integrity loss. Attackers can read memory and halt services, but cannot modify stored data through this specific flaw. The scope change signals that exploitation affects components beyond the immediate vulnerable process, likely impacting overall switch operation.
According to the HPE security bulletin, no authentication is required and no user interaction is involved. Attack complexity is low, meaning no special preconditions are needed beyond adjacent network access.
Root Cause
The root cause is missing or inadequate bounds checking in a protocol-handling routine within AOS-S. When the function copies incoming data into a fixed-size buffer, oversized input overwrites surrounding memory. HPE has not published the specific function or protocol in the public advisory.
Attack Vector
Exploitation requires adjacent network positioning, typically the same broadcast domain or VLAN as the target switch. An attacker crafts a malformed protocol message and sends it to the switch. The overflow triggers memory disclosure in response traffic or crashes the device, producing a denial of service.
No public proof-of-concept exploit is currently available. The EPSS score reflects a low near-term exploitation probability, though adjacent-network buffer overflows in switch firmware are historically attractive targets. Refer to the HPE Security Bulletin for technical specifics.
Detection Methods for CVE-2026-76746
Indicators of Compromise
- Unexpected switch reboots, process crashes, or watchdog restarts logged in AOS-S event logs
- Malformed Layer 2 or management-protocol frames originating from endpoints on the same VLAN as management interfaces
- Loss of connectivity on switch ports or sudden topology changes without administrative action
Detection Strategies
- Monitor AOS-S syslog streams for crash dumps, memory faults, and abnormal process termination events
- Correlate switch restart events with recent ingress traffic patterns from adjacent hosts
- Deploy network-based detection for malformed or oversized protocol frames targeting switch management services
Monitoring Recommendations
- Forward AOS-S syslog and SNMP trap data to a centralized SIEM for correlation and alerting
- Baseline normal switch uptime and alert on unplanned reboots across the fleet
- Track adjacent-network device inventory and flag unauthorized hosts introduced to management VLANs
How to Mitigate CVE-2026-76746
Immediate Actions Required
- Review the HPE Security Bulletin and identify affected AOS-S versions in your environment
- Apply the HPE-provided firmware update to all vulnerable switches as soon as change windows permit
- Restrict Layer 2 adjacency to switch management interfaces using dedicated management VLANs and port access control
Patch Information
HPE has released fixed AOS-S firmware addressing CVE-2026-76746. Consult the HPE bulletin hpesbnw05156en_us for the exact fixed version matrix per switch platform. Prioritize patching switches that terminate user-accessible VLANs or guest networks.
Workarounds
- Isolate switch management interfaces onto a dedicated out-of-band VLAN with strict ACLs
- Disable unused protocols and services on AOS-S switches to reduce the adjacent attack surface
- Enforce 802.1X or MAC-based authentication on access ports to limit which devices can reach the switch at Layer 2
# Example AOS-S hardening: restrict management access to a dedicated VLAN
configure terminal
vlan 999 name MGMT
ip-recv-mac-address <switch-mgmt-mac> vlan 999
interface vlan 999
ip address 10.99.0.10/24
exit
# Apply an ACL permitting only authorized management subnets
ip access-list extended MGMT-ACL
permit tcp 10.10.0.0/24 10.99.0.10/32 eq 22
deny ip any 10.99.0.10/32
permit ip any any
exit
vlan 999 ip access-group MGMT-ACL in
write memory
Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB

