Skip to main content
Vulnerability Database/CVE-2026-74220

CVE-2026-74220: U-Boot Buffer Overflow Vulnerability

CVE-2026-74220 is a buffer overflow flaw in U-Boot that allows malicious NFS servers to corrupt memory and crash the bootloader. This article covers technical details, affected versions, security impact, and mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-74220 Overview

CVE-2026-74220 is a buffer overflow vulnerability in U-Boot versions before 2026.10-rc5. The flaw resides in the nfs_read_reply() function in net/nfs-common.c. A malicious Network File System (NFS) server can send crafted NFS READ reply lengths that bypass length validation due to signed integer handling. Successful exploitation corrupts memory in the bootloader, causing crashes or enabling further memory corruption during the boot process. The vulnerability is classified under [CWE-195: Signed to Unsigned Conversion Error].

Critical Impact

A malicious NFS server can corrupt bootloader memory during network boot, crashing the device or writing far past the destination buffer, undermining the integrity of the boot process.

Affected Products

  • U-Boot bootloader versions before 2026.10-rc5
  • Embedded systems and devices that use U-Boot with NFS network boot enabled
  • IoT, industrial, and networking hardware that rely on U-Boot for firmware loading

Discovery Timeline

  • 2026-09-29 - CVE-2026-74220 published to NVD
  • 2026-09-29 - Last updated in NVD database

Technical Details for CVE-2026-74220

Vulnerability Analysis

The vulnerability lives in the NFS client code path of U-Boot, specifically the nfs_read_reply() handler in net/nfs-common.c. When U-Boot performs a network boot over NFS, it parses reply packets that include a length field describing how many bytes of data follow. The original implementation declared the reply length as a signed int (rlen) and used it in comparisons and copy operations without a proper unsigned bounds check.

An attacker who controls the NFS server can supply a crafted length value that is interpreted as negative when treated as signed. Signed comparisons then permit the value to bypass upper-bound validation. When the same value is subsequently used as a size argument in a memory copy, it is treated as a very large unsigned quantity, causing writes far past the destination buffer.

The impact is deterministic memory corruption inside the bootloader address space. Consequences include immediate bootloader crash, denial of service on the device, and potential control-flow corruption before the operating system starts.

Root Cause

The root cause is a signed-to-unsigned conversion error [CWE-195] in the handling of an attacker-controlled length. The field was declared as int rlen and never validated as an unsigned quantity against the destination buffer size before being used to copy NFS reply data.

Attack Vector

Exploitation requires the target device to boot from or mount an NFS share controlled by the attacker. This is common in embedded provisioning, lab environments, and any deployment that uses PXE-style network boot with NFS root. No authentication or user interaction is required on the U-Boot side because U-Boot's NFS client does not authenticate the server.

c
 static int nfs_read_reply(uchar *pkt, unsigned int len)
 {
 	struct rpc_t rpc_pkt;
-	int rlen;
+	u32 rlen;
+	size_t data_offset;
 	uchar *data_ptr;
 
 	memcpy(&rpc_pkt.u.data[0], pkt, sizeof(rpc_pkt.u.reply));

Source: U-Boot commit 0bbf098. The patch changes rlen from a signed int to an unsigned u32 and introduces a size_t data_offset, ensuring the reply length is treated as unsigned and bounded before use.

Detection Methods for CVE-2026-74220

Indicators of Compromise

  • Repeated U-Boot crashes, watchdog resets, or boot loops on devices configured for NFS boot.
  • Unexpected NFS servers responding to boot-time RPC requests on the management or provisioning network.
  • Malformed NFS READ reply packets with abnormally large or negative-appearing length fields captured on the wire.

Detection Strategies

  • Inventory devices running U-Boot and identify versions prior to 2026.10-rc5 using firmware bill-of-materials data.
  • Perform packet capture on network segments used for NFS boot and inspect NFS READ reply lengths against expected block sizes.
  • Enable serial console logging during boot to capture bootloader panics and stack traces that correlate with NFS transactions.

Monitoring Recommendations

  • Monitor DHCP and TFTP/NFS boot logs for unauthorized servers advertising boot images on provisioning VLANs.
  • Alert on unexpected NFS traffic sourced from hosts outside the sanctioned build and provisioning infrastructure.
  • Track device reboot patterns and correlate them with network boot events to surface exploitation attempts.

How to Mitigate CVE-2026-74220

Immediate Actions Required

  • Upgrade U-Boot to version 2026.10-rc5 or later on all affected devices as firmware release cycles allow.
  • Restrict NFS boot to isolated, trusted provisioning networks with no exposure to untrusted hosts.
  • Where feasible, disable NFS boot in production and switch to signed image loading over authenticated transports.

Patch Information

The fix is committed to the U-Boot mainline in commit 0bbf098 and included in U-Boot 2026.10-rc5. The patch changes the reply length variable from signed int to unsigned u32 and bounds the NFS read reply length before it is used to copy data. See the VulnCheck U-Boot Advisory and the vulnerable source in nfs-common.c for reference.

Workarounds

  • Disable the NFS boot command in U-Boot builds by removing CONFIG_CMD_NFS where NFS boot is not required.
  • Segment provisioning networks with strict Layer 2 and Layer 3 controls so only authorized NFS servers can respond during boot.
  • Prefer verified boot chains and signed images over TFTP/HTTPS in place of unauthenticated NFS whenever possible.
bash
# Disable NFS command support in U-Boot defconfig
# Remove or unset the following in your board defconfig, then rebuild:
# CONFIG_CMD_NFS=y
scripts/config --file configs/<board>_defconfig --disable CMD_NFS
make <board>_defconfig
make -j$(nproc)

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.