Skip to main content
Vulnerability Database/CVE-2026-49868

CVE-2026-49868: RIOT OS DHCPv6 Client DoS Vulnerability

CVE-2026-49868 is a denial of service vulnerability in RIOT OS DHCPv6 client that enables malicious servers to crash devices through malformed REPLY messages. This article covers technical details, affected versions, and mitigation.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-49868 Overview

RIOT is an open-source microcontroller operating system for Internet of Things (IoT) devices and embedded systems. CVE-2026-49868 is an out-of-bounds read vulnerability [CWE-125] in the Dynamic Host Configuration Protocol version 6 (DHCPv6) client. The _parse_reply() function in sys/net/application_layer/dhcpv6/client.c omits minimum-length validation before passing Identity Association for Prefix Delegation (IA_PD) and Identity Association for Non-temporary Addresses (IA_NA) option bodies to sub-option parsers. The flaw affects all RIOT versions prior to 2026.07 when MODULE_DHCPV6_CLIENT_IA_PD is enabled. A malicious or compromised DHCPv6 server can trigger memory corruption on affected devices.

Critical Impact

A crafted DHCPv6 REPLY message causes size_t underflow and unbounded out-of-bounds heap reads, crashing the device and potentially exposing or corrupting memory.

Affected Products

  • RIOT operating system versions prior to 2026.07
  • RIOT builds with MODULE_DHCPV6_CLIENT_IA_PD enabled
  • IoT and embedded devices running vulnerable RIOT firmware with DHCPv6 client

Discovery Timeline

  • 2026-10-16 - CVE-2026-49868 published to the National Vulnerability Database (NVD)
  • 2026-10-21 - Last updated in NVD database

Technical Details for CVE-2026-49868

Vulnerability Analysis

The vulnerability resides in RIOT's DHCPv6 client reply parser. When processing a DHCPv6 REPLY message, _parse_reply() iterates through options and dispatches IA_PD and IA_NA options to dedicated sub-parsers. The dispatch path trusts the option length field without verifying it meets the minimum size of the corresponding option structure. An attacker-controlled server returns a REPLY where opt_len is smaller than sizeof(dhcpv6_opt_ia_pd_t) or sizeof(dhcpv6_opt_ia_na_t). Internal arithmetic on the undersized length underflows size_t, producing a large value that drives subsequent reads far past the option body into unrelated heap memory. The result is a device crash and potential disclosure or corruption of adjacent memory contents.

Root Cause

The root cause is missing input validation prior to type casting an attacker-controlled byte buffer to a structured option type. The parser casts the option pointer directly to dhcpv6_opt_ia_pd_t * without first confirming the buffer contains enough bytes to represent that structure, violating safe deserialization practice.

Attack Vector

An attacker operates a malicious DHCPv6 server or compromises one on the same network segment as the target. When a RIOT-based IoT device solicits an address, the attacker returns a REPLY containing an IA_PD or IA_NA option with a truncated length field. No authentication or user interaction is required, and the attack is reachable over the local network.

c
                break;
#endif  /* IS_USED(MODULE_DHCPV6_CLIENT_DNS) */
            case DHCPV6_OPT_IA_PD:
-                if (_parse_ia_pd_option((dhcpv6_opt_ia_pd_t *)opt)) {
+                if (_opt_len(opt) < sizeof(dhcpv6_opt_ia_pd_t)) {
+                    DEBUG("DHCPv6 client: IA_PD option underflow minimum size\n");
+                    return false;
+                } else if (_parse_ia_pd_option((dhcpv6_opt_ia_pd_t *)opt)) {
                     /* No error occurred */
                     break;
                 } else {
                     /* Something went wrong */
                     return false;
                 }
            case DHCPV6_OPT_IA_NA:
-                 if (_parse_ia_na_option((dhcpv6_opt_ia_na_t *)opt)) {
+                 if (_opt_len(opt) < sizeof(dhcpv6_opt_ia_na_t)) {
+                    DEBUG("DHCPv6 client: IA_NA option underflow minimum size\n");
+                    return false;
+                 } else if (_parse_ia_na_option((dhcpv6_opt_ia_na_t *)opt)) {
                     /* No error occurred */
                     break;
                 } else {

Source: RIOT-OS Commit c9830dc5. The patch inserts an explicit minimum-length check that rejects undersized IA_PD and IA_NA options before invoking the sub-parsers.

Detection Methods for CVE-2026-49868

Indicators of Compromise

  • Unexpected reboots, hangs, or watchdog resets on RIOT-based devices shortly after DHCPv6 lease negotiation
  • DHCPv6 REPLY packets from unauthorized or unknown DHCPv6 servers on the local network segment
  • DHCPv6 options with length fields smaller than the DHCPv6 structural minimums defined in RFC 8415

Detection Strategies

  • Capture DHCPv6 traffic on IoT network segments and inspect IA_PD (option code 25) and IA_NA (option code 3) option-length fields for values below the required structure size
  • Alert on rogue DHCPv6 servers advertising on segments where only authorized servers should respond
  • Correlate device crash telemetry with recent DHCPv6 REPLY activity sourced from untrusted addresses

Monitoring Recommendations

  • Enable DHCPv6 snooping or equivalent Layer 2 controls on switches serving IoT subnets
  • Forward DHCPv6 server logs and router advertisements into a central Security Information and Event Management (SIEM) platform for anomaly review
  • Monitor firmware inventories to confirm all RIOT deployments report version 2026.07 or later

How to Mitigate CVE-2026-49868

Immediate Actions Required

  • Upgrade all RIOT-based devices to version 2026.07 or later, which contains the fix in sys/net/application_layer/dhcpv6/client.c
  • Audit builds for the MODULE_DHCPV6_CLIENT_IA_PD flag and prioritize patching devices where it is enabled
  • Restrict DHCPv6 server traffic to authorized hosts using Layer 2 filtering or dedicated management VLANs

Patch Information

The fix is included in RIOT release 2026.07. Review the upstream patch in RIOT-OS Commit c9830dc5, the merged change in RIOT-OS Pull Request #22322, the signed release at RIOT-OS Release 2026.07, and the coordinated advisory GHSA-p3fx-9qcg-jmcf.

Workarounds

  • Disable MODULE_DHCPV6_CLIENT_IA_PD in device build configurations where prefix delegation is not required
  • Deploy DHCPv6 snooping, port security, or static IPv6 configuration to prevent rogue servers from reaching clients
  • Segment IoT devices onto isolated networks with authenticated upstream infrastructure until firmware updates are rolled out
bash
# Rebuild RIOT firmware without the vulnerable prefix delegation module
make BOARD=<board> DISABLE_MODULE=dhcpv6_client_ia_pd clean all

# Verify installed version meets the fixed release
git -C RIOT describe --tags  # expect 2026.07 or later

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.