Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB
CVE-2026-102692 Overview
CVE-2026-102692 is an integer overflow vulnerability [CWE-190] in RIOT, an open-source microcontroller operating system for Internet of Things (IoT) and embedded devices. The nanocoap component accepts oversized Constrained Application Protocol (CoAP) Block2 option values without enforcing the 20-bit maximum block number. On 32-bit targets, the block offset multiplication overflows, producing an invalid slice range. A remote CoAP client can send a malformed Block2 option to trigger out-of-bounds memory access, denial of service, or memory corruption on the target device. The issue affects master baseline commit aeeae69e and is fixed in release 2026.07.
Critical Impact
An unauthenticated remote attacker can send a single malformed CoAP Block2 option to cause memory corruption or denial of service on embedded IoT devices running vulnerable RIOT builds.
Affected Products
- RIOT operating system master branch at commit aeeae69e
- RIOT nanocoap subsystem on 32-bit targets
- RIOT releases prior to 2026.07
Discovery Timeline
- 2026-10-16 - CVE-2026-102692 published to NVD
- 2026-10-16 - Last updated in NVD database
Technical Details for CVE-2026-102692
Vulnerability Analysis
The vulnerability resides in the nanocoap CoAP implementation shipped with RIOT. The CoAP Block-Wise Transfer specification (RFC 7959) defines the Block2 option, which carries a block number limited to 20 bits (maximum 0xFFFFF). The nanocoap parser does not enforce this upper bound before using the value in offset arithmetic.
When an oversized block number is multiplied by the block size to derive a byte offset, the result exceeds the range of a 32-bit unsigned integer and wraps. The resulting coap_block_slicer_t structure contains an attacker-controlled, invalid slice range. Downstream copy and bounds-check operations then reference memory outside the intended buffer.
Root Cause
The oversized Block2 value propagates from coap_get_blockopt() into coap_block_slicer_init() without validation. The slicer initialization function does not report an error when the computed offset wraps, so handlers continue to operate on a corrupted slicer state. This is a classic integer overflow leading to out-of-bounds memory access on constrained devices.
Attack Vector
Exploitation requires only network reachability to the vulnerable CoAP endpoint. The attacker crafts a CoAP GET request containing a Block2 option whose block number exceeds the 20-bit limit. No authentication, user interaction, or prior session state is required. The crafted request reaches the resource handler, which calls coap_block2_init() and operates on the invalid slicer, producing out-of-bounds reads or writes.
// Patch: examples/networking/coap/gcoap_block_server/gcoap_block.c
// sys/nanocoap: handle overflow in offset calculation
{
(void)ctx;
coap_block_slicer_t slicer;
- coap_block2_init(pdu, &slicer);
+ int res = coap_block2_init(pdu, &slicer);
+ if (res) { return res; }
gcoap_resp_init(pdu, buf, len, COAP_CODE_CONTENT);
coap_opt_add_format(pdu, COAP_FORMAT_TEXT);
coap_opt_add_block2(pdu, &slicer, 1);
ssize_t plen = coap_opt_finish(pdu, COAP_OPT_FINISH_PAYLOAD);
/* Add actual content */
- int res = coap_blockwise_put_bytes_pkt(pdu, &slicer, block2_intro, sizeof(block2_intro)-1);
+ res = coap_blockwise_put_bytes_pkt(pdu, &slicer, block2_intro, sizeof(block2_intro)-1);
if (res) { return res; }
}
Source: RIOT-OS commit 6b283ac. The patch changes coap_block2_init() from a void-return pattern to a checked return value, allowing handlers to abort cleanly when an oversized Block2 option is received.
Detection Methods for CVE-2026-102692
Indicators of Compromise
- Inbound CoAP packets to UDP port 5683 containing Block2 option values with block numbers greater than 0xFFFFF
- Unexpected device reboots, watchdog resets, or hard faults on RIOT-based IoT devices after receiving CoAP traffic
- Memory corruption telemetry or stack canary violations in nanocoap server handlers
Detection Strategies
- Deploy network sensors to parse CoAP options and alert on Block2 option values exceeding the RFC 7959 20-bit block number maximum
- Inventory firmware images referencing RIOT master commit aeeae69e or any pre-2026.07 revision of nanocoap
- Correlate device crash logs with inbound CoAP traffic patterns to identify exploitation attempts
Monitoring Recommendations
- Capture CoAP traffic at network boundaries facing untrusted segments and retain packet metadata for forensic review
- Monitor IoT device availability and reboot frequency as a proxy signal for denial-of-service exploitation
- Alert on any CoAP source outside the expected management plane communicating with embedded devices exposing nanocoap endpoints
How to Mitigate CVE-2026-102692
Immediate Actions Required
- Upgrade affected devices to RIOT release 2026.07 or later
- Apply the upstream fix commits 6b283ac and ee1fa0e to firmware trees that cannot immediately move to a tagged release
- Restrict network reachability to CoAP endpoints on affected devices until patched firmware is deployed
Patch Information
The fix is included in RIOT release 2026.07. The upstream commits add return-value checking to coap_block2_init() and update example server handlers in examples/networking/coap/gcoap_block_server/gcoap_block.c and examples/networking/coap/nanocoap_server/coap_handler.c to propagate errors. Full details are documented in GitHub Security Advisory GHSA-8365-gj33-rgpf.
Workarounds
- Place vulnerable devices behind a CoAP-aware gateway that validates Block2 option sizes before forwarding
- Disable or remove nanocoap resource handlers that use coap_block2_init() where blockwise transfer is not required
- Enforce firewall rules limiting CoAP (UDP/5683 and DTLS/5684) to known-good management hosts
# Example iptables rule limiting CoAP ingress to a trusted management host
iptables -A INPUT -p udp --dport 5683 -s 10.0.10.5 -j ACCEPT
iptables -A INPUT -p udp --dport 5683 -j DROP
Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB

