Skip to main content
Vulnerability Database/CVE-2026-108163

CVE-2026-108163: Pingvin Share X Auth Bypass Vulnerability

CVE-2026-108163 is an authentication bypass flaw in Pingvin Share X caused by ineffective rate limiting that allows attackers to brute-force credentials. This post explains its impact, affected versions, and mitigation steps.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-108163 Overview

CVE-2026-108163 is an ineffective rate limiting vulnerability in Pingvin Share X versions prior to 1.22.0. The application configures throttler Time-To-Live (TTL) values in seconds, but the underlying NestJS ThrottlerModule interprets these values as milliseconds. This mismatch reduces the intended rate limit windows by a factor of 1,000, allowing effectively unthrottled requests to authentication endpoints. Unauthenticated attackers can brute-force passwords and Time-based One-Time Password (TOTP) codes against /api/auth/signIn, /api/auth/signIn/totp, and /api/auth/resetPassword. The weakness is tracked under [CWE-307: Improper Restriction of Excessive Authentication Attempts].

Critical Impact

Attackers can perform high-volume credential and TOTP brute-force attacks against unpatched Pingvin Share X instances, bypassing the intended authentication throttling controls.

Affected Products

  • Pingvin Share X versions before 1.22.0
  • Backend authentication endpoints /api/auth/signIn, /api/auth/signIn/totp, and /api/auth/resetPassword
  • Global ThrottlerModule configuration in backend/src/app.module.ts

Discovery Timeline

  • 2026-10-10 - CVE-2026-108163 published to the National Vulnerability Database (NVD)
  • 2026-10-16 - Last updated in NVD database

Technical Details for CVE-2026-108163

Vulnerability Analysis

Pingvin Share X uses the NestJS @nestjs/throttler module to limit request rates on sensitive endpoints. The developer-supplied TTL values were written as seconds, but ThrottlerModule expects TTL in milliseconds. A value of 60 becomes a 60-millisecond window instead of 60 seconds, and the per-route 5 * 60 value on signup becomes a 300-millisecond window instead of 5 minutes.

The practical result is that the throttling window closes almost immediately. Attackers can issue thousands of authentication attempts per second without triggering the configured limits of 100 requests globally or 20 requests per route. This enables password spraying, credential stuffing, and TOTP code brute forcing against authentication and password reset endpoints.

Root Cause

The root cause is a unit-of-measure error in the throttler configuration. Both the global ThrottlerModule.forRoot block and the per-controller @Throttle decorators specify TTL in seconds, while the library API requires milliseconds. The fix multiplies each TTL by 1000 to restore the intended time windows.

Attack Vector

Exploitation is remote, unauthenticated, and requires no user interaction. An attacker sends HTTP POST requests to the vulnerable authentication endpoints at a rate exceeding the millisecond-sized throttle window. Because TOTP codes are only six digits, the effective brute-force space is small enough to exhaust quickly once rate limiting is removed.

typescript
// Patch in backend/src/app.module.ts - fix: correctly specify ttl in ms
     SystemModule,
     ThrottlerModule.forRoot([
       {
-        ttl: 60,
+        ttl: 60 * 1000,
         limit: 100,
       },
     ]),
// Source: https://github.com/smp46/pingvin-share-x/commit/dc0aa5f66287038d5f919e74948462f994b1d6b1
typescript
// Patch in backend/src/auth/auth.controller.ts - fix: correctly specify ttl in ms
   @Throttle({
     default: {
       limit: 20,
-      ttl: 5 * 60,
+      ttl: 5 * 60 * 1000,
     },
   })
   async signUp(
// Source: https://github.com/smp46/pingvin-share-x/commit/dc0aa5f66287038d5f919e74948462f994b1d6b1

Detect Identity Attacks the Moment Authentication Fails

Singularity™ Identity surfaces credential misuse, lateral movement, and privilege escalation in real time, so you can contain the breach before it spreads.

Stop Identity Attacks

Detection Methods for CVE-2026-108163

Indicators of Compromise

  • High-volume POST requests from a single source to /api/auth/signIn, /api/auth/signIn/totp, or /api/auth/resetPassword.
  • Repeated authentication failures for one or many user accounts within short time intervals.
  • Successful authentication immediately following a burst of failed attempts, indicating a successful brute-force outcome.

Detection Strategies

  • Baseline the normal request rate to Pingvin Share X authentication routes and alert on deviations exceeding that baseline.
  • Correlate HTTP 401 and 403 response bursts against the same username or source IP across the three affected endpoints.
  • Inspect reverse proxy or Web Application Firewall (WAF) logs for TOTP endpoint requests cycling through sequential six-digit codes.

Monitoring Recommendations

  • Forward backend and reverse proxy logs to a centralized analytics platform for authentication anomaly detection.
  • Enable alerts on failed login thresholds per user, per IP, and per endpoint within short rolling windows.
  • Track TOTP verification failure counts separately from password failures to catch second-factor brute forcing.

How to Mitigate CVE-2026-108163

Immediate Actions Required

  • Upgrade all Pingvin Share X deployments to version 1.22.0 or later.
  • Place the application behind a reverse proxy or WAF that enforces independent IP-based and account-based rate limits on authentication routes.
  • Review authentication logs since deployment for evidence of brute-force activity and force password resets on any accounts showing suspicious access patterns.

Patch Information

The fix is included in Pingvin Share X v1.22.0 and committed in commit dc0aa5f66287. The patch multiplies each TTL value by 1000 to express the duration in milliseconds, matching the @nestjs/throttler API contract. See the GitHub Security Advisory GHSA-7gx2-g6x2-7mjg and the VulnCheck advisory for additional detail.

Workarounds

  • Front the application with Nginx, HAProxy, or a cloud WAF that enforces per-IP and per-route request limits on /api/auth/*.
  • Temporarily disable the password reset and TOTP endpoints if they are not required until the patched version can be deployed.
  • Enforce account lockout after a small number of failed authentication attempts at the identity provider level where feasible.
bash
# Nginx reverse proxy example limiting authentication requests to 10 per minute per IP
http {
    limit_req_zone $binary_remote_addr zone=pingvin_auth:10m rate=10r/m;

    server {
        location ~ ^/api/auth/(signIn|signIn/totp|resetPassword)$ {
            limit_req zone=pingvin_auth burst=5 nodelay;
            proxy_pass http://pingvin_backend;
        }
    }
}

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.