Skip to main content
Vulnerability Database/CVE-2026-101055

CVE-2026-101055: Thinkware U3000 Information Disclosure Flaw

CVE-2026-101055 is an information disclosure vulnerability in Thinkware U3000 affecting versions up to 1.02.04. Attackers can remotely exploit the GET_STATUS function to access sensitive data. This article covers technical details, affected versions, security impact, and mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-101055 Overview

CVE-2026-101055 is an information disclosure vulnerability in the Thinkware U3000 dashcam firmware up to version 1.02.04. The flaw resides in the GET_STATUS function of the device's TCP service. An unauthenticated remote attacker can manipulate the wifi_info argument to retrieve sensitive WiFi credential data from the device. The weakness is classified under CWE-200: Exposure of Sensitive Information to an Unauthorized Actor. Public exploit details have been released, and the vendor did not respond to disclosure attempts.

Critical Impact

Remote, unauthenticated attackers within network reach of the dashcam can disclose WiFi configuration data, exposing credentials that may enable further network compromise.

Affected Products

  • Thinkware U3000 dashcam firmware versions up to and including 1.02.04
  • TCP service component exposing the GET_STATUS handler
  • Devices with the wifi_info argument accessible via the TCP interface

Discovery Timeline

  • 2026-09-28 - CVE-2026-101055 published to NVD
  • 2026-09-28 - Last updated in NVD database
  • Disclosure - Technical findings published via the turretsec disclosure repository; vendor did not respond

Technical Details for CVE-2026-101055

Vulnerability Analysis

The Thinkware U3000 dashcam exposes a TCP service that implements a GET_STATUS command used to report device state. When a client supplies the wifi_info argument, the service returns WiFi-related configuration data without enforcing authentication or access control. This behavior constitutes an information disclosure flaw aligned with CWE-200.

The attack is executed over the network with low complexity and requires no privileges or user interaction. Because the exposed data includes WiFi credentials, an attacker who reaches the TCP service can harvest information that may permit lateral access to the WiFi network the dashcam connects to. The vendor was notified prior to publication but did not provide a response, and no official patch has been published at the time of writing.

Root Cause

The root cause is missing authorization on the GET_STATUS handler in the TCP service. The handler returns the wifi_info dataset to any client that connects and issues the request. There is no session validation, no credential prompt, and no scoping of which fields may be returned to unauthenticated callers.

Attack Vector

Exploitation requires network reachability to the dashcam's TCP service. An attacker on the same WiFi segment, or on an upstream network with routable access to the device, can send a crafted GET_STATUS request specifying wifi_info. The service responds with WiFi configuration details. See the public technical write-up for the request format and response fields.

Detection Methods for CVE-2026-101055

Indicators of Compromise

  • Unexpected inbound TCP connections to the Thinkware U3000 service port from unknown clients
  • GET_STATUS requests containing the wifi_info argument captured in network telemetry
  • Repeated short-lived TCP sessions to the dashcam originating from devices that do not normally communicate with it

Detection Strategies

  • Deploy network IDS signatures that flag GET_STATUS requests carrying the wifi_info argument against Thinkware U3000 devices
  • Baseline normal traffic to and from the dashcam, then alert on deviations such as new source IPs or elevated request volumes
  • Correlate dashcam service access with WiFi authentication events to identify potential credential reuse following disclosure

Monitoring Recommendations

  • Capture full packet data on network segments hosting the dashcam to retain evidence of GET_STATUS queries
  • Monitor WiFi infrastructure logs for authentications using the dashcam's configured SSID from unexpected client MAC addresses
  • Alert on any management plane access to the dashcam from outside an approved administrative subnet

How to Mitigate CVE-2026-101055

Immediate Actions Required

  • Isolate affected Thinkware U3000 devices onto a dedicated VLAN or SSID with no routing to sensitive networks
  • Restrict inbound access to the dashcam's TCP service using firewall or wireless access-point ACLs
  • Rotate WiFi credentials used by any network the dashcam has been configured to join, and treat prior credentials as exposed

Patch Information

No vendor patch is available at the time of publication. The vendor was contacted but did not respond to the disclosure. Monitor the VulDB entry for CVE-2026-101055 and official Thinkware channels for firmware updates.

Workarounds

  • Place the dashcam on an isolated guest WiFi network that does not share credentials with any production or trusted SSID
  • Block external access to the device's TCP service at the network perimeter and at the local access point
  • Disable WiFi features on the dashcam when not required for firmware updates or data transfer
bash
# Example: restrict access to the Thinkware U3000 TCP service with iptables
# Allow only a trusted admin host, drop everything else destined for the device
iptables -A FORWARD -s 192.0.2.10 -d <dashcam_ip> -p tcp --dport <service_port> -j ACCEPT
iptables -A FORWARD -d <dashcam_ip> -p tcp --dport <service_port> -j DROP

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.