Skip to main content
Vulnerability Database/CVE-2025-10456

CVE-2025-10456: Zephyr BLE Fixed Channel DoS Vulnerability

CVE-2025-10456 is a denial of service flaw in Zephyr BLE stack affecting fixed channel handling. Attackers can trigger crashes or memory corruption through improper disconnection attempts. This article covers technical details, affected versions, impact assessment, and mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2025-10456 Overview

CVE-2025-10456 is a vulnerability in the Zephyr real-time operating system (RTOS) affecting its Bluetooth Low Energy (BLE) stack. The flaw involves improper handling of fixed BLE channels such as the Security Manager Protocol (SMP) and the Attribute Protocol (ATT). An attacker within Bluetooth range can trigger the target device to attempt disconnection of a fixed channel, an action the Bluetooth specification does not permit. The resulting undefined behavior may cause assertion failures, device crashes, or memory corruption depending on the BLE stack implementation.

Critical Impact

Adjacent-network attackers can crash or destabilize Zephyr-based BLE devices without authentication or user interaction, affecting availability of IoT and embedded systems.

Affected Products

  • Zephyr RTOS (zephyrproject-rtos/zephyr)
  • Devices and firmware built on Zephyr with BLE host stack enabled
  • IoT and embedded products integrating affected Zephyr BLE components

Discovery Timeline

  • 2025-09-19 - CVE-2025-10456 published to the National Vulnerability Database (NVD)
  • 2026-06-17 - Last updated in NVD database

Technical Details for CVE-2025-10456

Vulnerability Analysis

The vulnerability resides in Zephyr's BLE host stack logic that governs L2CAP channel lifecycle management. BLE defines fixed channels, including SMP (CID 0x0006) and ATT (CID 0x0004), which remain established for the duration of a connection. The Bluetooth Core specification prohibits explicit disconnection of these fixed channels.

An adjacent attacker can send crafted L2CAP signaling that causes the target device to initiate a disconnect operation against one of these fixed channels. The stack reaches a code path that was not designed to handle this state transition, producing undefined behavior. The classification [CWE-190] (Integer Overflow or Wraparound) indicates the fault surface includes arithmetic errors in channel state or reference accounting that compound the misuse.

Root Cause

The root cause is missing validation on the channel type before executing disconnect handling logic. The implementation treats fixed channels equivalently to dynamic L2CAP channels during teardown, leading to assertion failures, dereference of invalid state, or corruption of adjacent memory in the channel structures.

Attack Vector

Exploitation requires Bluetooth range (adjacent network) access to a vulnerable Zephyr BLE peripheral or central. The attacker establishes a BLE connection and issues signaling that drives the target into attempting to disconnect a fixed channel. No authentication, pairing, or user interaction is required. The result is loss of availability on the target device, with potential for memory corruption on specific stack configurations.

For technical details, see the Zephyr GitHub Security Advisory GHSA-hcc8-3qr7-c9m8.

Detection Methods for CVE-2025-10456

Indicators of Compromise

  • Unexpected device reboots or watchdog resets on Zephyr-based BLE devices after a nearby BLE connection event.
  • Kernel assertion log entries referencing L2CAP, SMP, or ATT channel handlers.
  • Repeated short-lived BLE connections from unknown peers followed by target disconnection or crash.

Detection Strategies

  • Monitor Zephyr device serial or RTT logs for __ASSERT failures and fault handlers triggered during BLE signaling.
  • Capture BLE sniffer traces around crash events and inspect for L2CAP disconnect requests targeting CIDs 0x0004 or 0x0006.
  • Correlate device telemetry showing availability loss with proximity-based attack indicators from physical security systems.

Monitoring Recommendations

  • Enable crash dump collection and remote telemetry on fleet devices to detect repeated BLE-induced faults.
  • Track firmware versions across deployed Zephyr devices and flag assets running versions prior to the GHSA-hcc8-3qr7-c9m8 fix.
  • Alert on anomalous BLE connection patterns, including rapid connect-disconnect cycles from unpaired peers.

How to Mitigate CVE-2025-10456

Immediate Actions Required

  • Inventory all firmware images and products using the Zephyr BLE host stack and identify versions prior to the GHSA-hcc8-3qr7-c9m8 fix.
  • Apply the upstream Zephyr patch and rebuild affected firmware for distribution to deployed devices.
  • Restrict BLE connectivity on sensitive devices by disabling advertising or requiring whitelisted peer addresses where feasible.

Patch Information

The Zephyr project has published a security advisory with patch details at GHSA-hcc8-3qr7-c9m8. Integrators should pull the fixed Zephyr release, rebuild firmware, and deploy updates through their standard over-the-air or field-update mechanism.

Workarounds

  • Limit BLE exposure by disabling connectable advertising on devices that do not require continuous pairing.
  • Enforce BLE bonding and address filtering to reduce the pool of peers that can trigger the vulnerable code path.
  • Deploy watchdog recovery and crash-restart policies so impacted devices return to service automatically after a fault.
bash
# Configuration example: identify Zephyr firmware versions in a build tree
west list -f "{name} {revision}" | grep -i zephyr

# After updating west manifest to the patched Zephyr release:
west update
west build -b <board> <application>

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.