Skip to main content
Vulnerability Database/CVE-2026-98206

CVE-2026-98206: Linux Kernel Buffer Overflow Vulnerability

CVE-2026-98206 is a buffer overflow flaw in the Linux kernel cyttsp5 input driver that could allow memory corruption. This post explains its technical details, affected versions, impact, and mitigation steps.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-98206 Overview

CVE-2026-98206 is a Linux kernel vulnerability in the Cypress TrueTouch Gen5 (cyttsp5) touchscreen input driver. The driver uses a size field supplied by the HID device as the length argument to memcpy() when copying into response_buf, a buffer sized to CY_MAX_INPUT bytes. Without clamping the device-provided value, a malicious or malfunctioning touchscreen can trigger an out-of-bounds write in kernel memory. The upstream fix clamps the HID report size before the copy. Patches have been merged across stable kernel branches.

Critical Impact

An attacker-controlled or faulty cyttsp5 HID device can supply an oversized report length, causing a kernel heap buffer overflow and potential memory corruption or denial of service.

Affected Products

  • Linux kernel versions containing the drivers/input/touchscreen/cyttsp5.c driver prior to the fixing commits
  • Stable kernel branches referenced by commits 495955f, 85f080f, 9eb2610, b172c69, and d41a80d
  • Distributions and embedded systems shipping the Cypress TrueTouch Gen5 touchscreen driver

Discovery Timeline

  • 2026-10-06 - CVE-2026-98206 published to NVD
  • 2026-10-06 - Last updated in NVD database

Technical Details for CVE-2026-98206

Vulnerability Analysis

The cyttsp5 driver handles Human Interface Device (HID) reports from Cypress TrueTouch Gen5 touchscreen controllers. When the driver receives a report, it reads a size field from the device payload and passes that value directly into memcpy() as the length, with response_buf (bounded to CY_MAX_INPUT bytes) as the destination. Because the device-supplied size is not clamped against CY_MAX_INPUT, a report advertising a length larger than the destination buffer causes an out-of-bounds write into kernel heap memory [CWE-787].

The fix adds a clamp so the copy length cannot exceed CY_MAX_INPUT. This is a classic input-validation failure where trust was placed in attacker-reachable, device-controlled data.

Root Cause

The driver treats the HID report size field as authoritative without range validation. Any value larger than CY_MAX_INPUT produces a kernel buffer overflow during the memcpy() call into response_buf.

Attack Vector

Exploitation requires a cyttsp5-compatible touchscreen that reports a malicious size value, or physical/bus-level access to inject a crafted HID report. On systems with soldered touchscreens the practical attack surface is limited, but on devices where the touch controller is replaceable or exposed over an attacker-accessible bus the condition can be triggered to corrupt kernel memory or crash the kernel.

No synthetic exploitation code is included. Refer to the upstream fix commits for the exact code paths and the clamp applied before memcpy().

Detection Methods for CVE-2026-98206

Indicators of Compromise

  • Unexpected kernel oops, panic, or KASAN: slab-out-of-bounds reports referencing cyttsp5_parse_input or related functions in drivers/input/touchscreen/cyttsp5.c
  • Repeated input subsystem errors or driver resets logged for a cyttsp5 device
  • HID reports from the touchscreen with a declared size larger than CY_MAX_INPUT

Detection Strategies

  • Enable CONFIG_KASAN on test and development kernels to catch out-of-bounds writes in the cyttsp5 code path during QA
  • Compare the running kernel version and cyttsp5.c source against the fixing commits (495955f, 85f080f, 9eb2610, b172c69, d41a80d) to confirm patch presence
  • Review vendor BSP (Board Support Package) kernels used in embedded, point-of-sale, and automotive devices, which frequently lag mainline stable updates

Monitoring Recommendations

  • Forward kernel ring buffer (dmesg, journalctl -k) to a central log store and alert on panics or input-driver faults
  • Track firmware and kernel versions across embedded fleets to identify unpatched devices
  • Monitor physical-access and supply-chain risks for devices with user-replaceable touchscreens

How to Mitigate CVE-2026-98206

Immediate Actions Required

  • Update to a Linux stable release containing one of the fixing commits: 495955f, 85f080f, 9eb2610, b172c69, or d41a80d
  • Rebuild and redeploy vendor or embedded kernels that carry the cyttsp5 driver
  • Audit device fleets for systems using Cypress TrueTouch Gen5 touchscreens and prioritize patching those first

Patch Information

The upstream fix clamps the HID report size against CY_MAX_INPUT before the memcpy() into response_buf. The patch is available in the following commits in the stable kernel tree: Kernel Git Commit 495955f, Kernel Git Commit 85f080f, Kernel Git Commit 9eb2610, Kernel Git Commit b172c69, and Kernel Git Commit d41a80d.

Workarounds

  • If the cyttsp5 driver is not required, blacklist the module to remove the vulnerable code path from the attack surface
  • Restrict physical access to devices with replaceable or exposed touchscreen controllers
  • Where possible, build the kernel without CONFIG_TOUCHSCREEN_CYTTSP5 until a patched kernel is deployed
bash
# Blacklist the cyttsp5 module until a patched kernel is deployed
echo "blacklist cyttsp5" | sudo tee /etc/modprobe.d/blacklist-cyttsp5.conf
sudo rmmod cyttsp5 2>/dev/null || true
sudo update-initramfs -u

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.