Skip to main content
Vulnerability Database/CVE-2026-93808

CVE-2026-93808: Linux Kernel Buffer Overflow Vulnerability

CVE-2026-93808 is a buffer overflow flaw in the Linux kernel ALSA USB audio driver affecting endpoint reply validation. Attackers could exploit insufficient length checks in command processing. This article covers technical details, affected versions, impact assessment, and mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-93808 Overview

CVE-2026-93808 is a Linux kernel vulnerability in the ALSA usb-audio caiaq driver. The function usb_ep1_command_reply_dispatch() reads command-specific fixed items from a USB Request Block (URB) buffer without first validating that urb->actual_length contains those bytes. A malicious or malfunctioning USB device presenting itself as a Native Instruments caiaq audio interface can send short EP1 replies that trigger out-of-bounds reads inside the kernel.

The upstream fix adds per-command length checks and rejects short analog input payloads before the input helper reads fixed offsets from the EP1 reply.

Critical Impact

A crafted USB device can trigger kernel out-of-bounds reads in the caiaq driver, enabling potential kernel memory disclosure or denial of service on affected Linux hosts.

Affected Products

  • Linux kernel ALSA snd-usb-caiaq driver
  • Systems with Native Instruments caiaq-class USB audio devices (Kore controller, Audio Kontrol 1, Rig Kontrol series, Maschine Controller)
  • Kernel branches prior to the commits 74f3c639, aba30af0, and af8a172c

Discovery Timeline

  • 2026-09-24 - CVE CVE-2026-93808 published to NVD
  • 2026-09-25 - Last updated in NVD database

Technical Details for CVE-2026-93808

Vulnerability Analysis

The caiaq driver handles asynchronous replies from EP1 of Native Instruments USB audio controllers through usb_ep1_command_reply_dispatch(). The dispatcher inspects buf[0] as a command identifier, then branches into command-specific handlers that read additional bytes from the same URB buffer.

Several code paths dereference buf + 1, buf[1], buf[2], or buf + 3 without checking whether the completed URB actually delivered that many bytes. When a USB device returns a reply shorter than the dispatcher assumes, the handlers read past the end of valid URB data. The control-state copy path additionally derives its payload length from the command byte rather than from the number of received bytes, extending the out-of-bounds read.

Analog input processing compounds the issue because an input helper reads fixed offsets from the EP1 reply without a prior length guard. Short analog input payloads reach that helper and cause further out-of-bounds access.

Root Cause

The root cause is missing input validation on the length of USB endpoint 1 replies before parsing. The driver trusts urb->actual_length implicitly and does not confirm it meets the minimum size required by each command branch. This is a classic out-of-bounds read class defect in driver code that parses attacker-controlled device input.

Attack Vector

Exploitation requires a USB device that advertises a caiaq-compatible vendor and product identifier and completes EP1 interrupt transfers with undersized payloads. The attack vector is physical USB access, including scenarios such as malicious peripherals, BadUSB-style devices, or virtualized USB passthrough from untrusted guests. No authentication is required once the device is enumerated by the kernel.

The vulnerability leads to kernel memory disclosure via subsequent telemetry paths or kernel crashes depending on the memory layout adjacent to the URB buffer. Reliable code execution is not demonstrated by the referenced commits.

No public proof-of-concept is listed in the enriched data, and the vulnerability is not present in the CISA Known Exploited Vulnerabilities catalog.

Detection Methods for CVE-2026-93808

Indicators of Compromise

  • Kernel log entries referencing snd-usb-caiaq warnings, oops, or KASAN out-of-bounds read reports in usb_ep1_command_reply_dispatch
  • Unexpected disconnection, re-enumeration, or driver crashes shortly after a caiaq-class USB device is attached
  • Unknown USB devices presenting Native Instruments vendor identifiers on hosts that do not use such hardware

Detection Strategies

  • Enable CONFIG_KASAN on test and staging kernels to catch the out-of-bounds read at runtime during device fuzzing
  • Monitor dmesg and journalctl -k for snd-usb-caiaq errors or ALSA subsystem faults correlated with USB hotplug events
  • Inventory loaded kernel modules with lsmod | grep caiaq and flag hosts loading the driver without a business need

Monitoring Recommendations

  • Forward kernel ring buffer and udev events to a centralized log pipeline for correlation with USB device insertions
  • Track USB device enumeration events, including vendor and product identifiers, to detect unauthorized peripherals
  • Alert on kernel oops or panic signatures originating from USB audio drivers on servers and workstations

How to Mitigate CVE-2026-93808

Immediate Actions Required

  • Apply the stable kernel updates containing commits 74f3c639f64fa5da4e1613149798b5089bce2807, aba30af07d4fe499b50209801eba9da8a815522f, and af8a172c4f71ac30d625f2966d2389a7fa872819
  • Blocklist the snd-usb-caiaq module on hosts that do not require Native Instruments audio hardware
  • Restrict physical USB access on sensitive systems and disable USB passthrough for untrusted virtual machines

Patch Information

The fix adds per-command length checks in usb_ep1_command_reply_dispatch(), derives the control-state copy length from bytes following the command byte, and rejects short analog input payloads before the input helper runs. Patches are available in the Linux stable tree:

Consume these through your distribution's updated kernel package once published.

Workarounds

  • Prevent the driver from loading by adding install snd-usb-caiaq /bin/true to a file under /etc/modprobe.d/
  • Use USB device authorization policies in udev or usbguard to allow only known-good peripherals
  • On endpoints where caiaq hardware is not expected, unload the module with modprobe -r snd_usb_caiaq after verifying no in-use audio sessions depend on it
bash
# Configuration example
# /etc/modprobe.d/blacklist-caiaq.conf
blacklist snd_usb_caiaq
install snd_usb_caiaq /bin/true

# Verify the module is not loaded
lsmod | grep caiaq

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.