Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB
CVE-2026-93306 Overview
CVE-2026-93306 affects the Advanced System Management Interface (ASMI) web interface in multiple IBM Power Systems firmware versions. An unauthenticated attacker with access to the management network can send a malformed HTTPS request to crash the ASMI web server. The crash can trigger possible memory corruption and generate an error log entry. While the web interface restarts automatically, repeated exploitation produces sustained loss of access to ASMI, affecting integrity and availability of the management plane. The vulnerability is classified as an out-of-bounds read [CWE-125]. Affected firmware streams include FW1120.00 through FW1120.01, FW1110.00 through FW1110.31, FW1060.00 through FW1060.81, and FW950.00 through FW950.H3.
Critical Impact
Unauthenticated adjacent-network attackers can repeatedly crash the ASMI management interface across IBM Power Systems, denying administrators access to critical server management functions.
Affected Products
- IBM Power System E1080 (9080-HEX) and E1180 (9080-HEU) firmware
- IBM Power System S922 (9009-22G), H922 (9223-22S), S914 (9009-41G), S924 (9009-42G), and H924 (9223-42S) firmware
- IBM Power System E950 (9040-MR9) and E980 (9080-M9S) firmware
Discovery Timeline
- 2026-09-25 - CVE-2026-93306 published to NVD
- 2026-09-30 - Last updated in NVD database
Technical Details for CVE-2026-93306
Vulnerability Analysis
The flaw resides in the HTTPS request-handling path of the ASMI web interface running on the service processor of affected IBM Power Systems. ASMI provides out-of-band administrative access for firmware updates, hardware configuration, partition management, and diagnostics. When ASMI receives a specifically malformed HTTPS request, the web server reads outside the bounds of an allocated buffer, triggering memory corruption and a process crash. The service processor automatically restarts the web server, so each exploitation attempt causes a transient outage rather than persistent compromise. However, an attacker scripting repeated requests can keep ASMI continuously unavailable, which blocks legitimate administrators from managing the system.
Root Cause
The root cause is an out-of-bounds read [CWE-125] in the ASMI HTTPS request parser. Input validation on the malformed request fails to constrain a read operation to the valid buffer region, which causes the web server process to access invalid memory. The resulting fault terminates the process and emits an error log entry on the service processor.
Attack Vector
Exploitation requires network reachability to the ASMI interface, typically exposed only on an isolated management network segment. The attacker needs no credentials and no user interaction. A single crafted HTTPS payload is sufficient to crash ASMI once. Sustained denial of service requires continuous or scripted delivery of the malformed request. No proof-of-concept exploit is publicly available, and the vulnerability is not listed in the CISA Known Exploited Vulnerabilities catalog.
No verified exploitation code is available. Refer to the IBM Support Document for vendor-provided technical details.
Detection Methods for CVE-2026-93306
Indicators of Compromise
- Unexpected ASMI web server crash events or restart messages in service processor error logs.
- Repeated short-duration outages of the ASMI HTTPS endpoint (TCP 443) on the management network.
- Bursts of malformed HTTPS requests directed at service processor IP addresses from unusual sources.
Detection Strategies
- Collect service processor error logs centrally and alert on recurring ASMI web server fault entries.
- Monitor management-network traffic for HTTPS requests to Power Systems service processors that trigger TLS resets or malformed payload signatures.
- Correlate administrator reports of ASMI inaccessibility with network telemetry to identify intentional abuse versus benign faults.
Monitoring Recommendations
- Enable availability monitoring on each ASMI endpoint with alerting on repeated reconnects within short intervals.
- Baseline normal ASMI access sources and flag HTTPS connections originating from unexpected hosts on the management VLAN.
- Forward service processor syslog and Hardware Management Console (HMC) event data into a centralized logging platform for retention and analysis.
How to Mitigate CVE-2026-93306
Immediate Actions Required
- Inventory all IBM Power Systems running the affected firmware streams (FW1120, FW1110, FW1060, FW950) and identify ASMI-exposed service processors.
- Apply the firmware updates referenced in the IBM security bulletin as soon as change windows permit.
- Restrict ASMI access to a dedicated management VLAN reachable only by authorized administrator jump hosts.
Patch Information
IBM has published remediation guidance in the IBM Support Document. Administrators should upgrade affected firmware beyond the vulnerable ranges: FW1120.00–FW1120.01, FW1110.00–FW1110.31, FW1060.00–FW1060.81, and FW950.00–FW950.H3. Follow IBM's documented firmware update procedures via the HMC or ASMI itself to apply the fix.
Workarounds
- Enforce network segmentation so only trusted administrative hosts can reach TCP 443 on service processors.
- Place access control lists on management switches and firewalls to block ASMI traffic from unauthorized subnets.
- Where feasible, disable or rate-limit external HTTPS access to ASMI until firmware updates are deployed.
# Example ACL concept restricting ASMI (HTTPS/443) to an admin jump host
# Replace addresses with values appropriate to your environment
access-list ASMI_MGMT permit tcp host 10.10.10.5 host 10.20.0.10 eq 443
access-list ASMI_MGMT deny tcp any host 10.20.0.10 eq 443
access-list ASMI_MGMT permit ip any any
Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB

