Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB
CVE-2026-79959 Overview
CVE-2026-79959 is a hard-coded credential vulnerability in the Botslab G980H dash camera firmware. The firmware ships with a root account password that users cannot change. An attacker who extracts the firmware image or gains physical access to the device can recover the credential. The recovered password grants root access through the Universal Asynchronous Receiver-Transmitter (UART) interface. The flaw is tracked under CWE-798: Use of Hard-coded Credentials and documented in CISA ICS Advisory ICSA-26-267-01.
Critical Impact
Physical access to the UART interface combined with the recovered root credential yields full administrative control over the device, including firmware, stored footage, and runtime configuration.
Affected Products
- Botslab G980H dash camera firmware
- Devices exposing the UART debug interface on the mainboard
- Deployments where firmware images are distributed or recoverable
Discovery Timeline
- 2026-09-24 - CVE-2026-79959 published to the National Vulnerability Database
- 2026-09-25 - Last updated in the NVD database
Technical Details for CVE-2026-79959
Vulnerability Analysis
The Botslab G980H firmware embeds a static root password in the device image. Because the credential is baked into the firmware, every unit in the field shares the same secret. The password cannot be rotated through any user-facing interface. An attacker with the firmware binary can locate the credential by extracting the root filesystem and inspecting /etc/shadow or equivalent authentication stores. Once the hash is recovered, offline cracking or direct lookup against public dictionaries exposes the plaintext credential.
The practical attack path requires physical possession of the device. Soldering or clipping onto the UART test pads opens an interactive serial console. Authenticating with the hard-coded credential drops the attacker into a root shell with full filesystem and kernel privileges.
Root Cause
The root cause is the vendor's decision to ship a static authentication secret inside the firmware image without a provisioning or first-boot credential rotation step. This design pattern violates CWE-798 guidance that credentials must be unique per device and user-rotatable.
Attack Vector
Exploitation requires local physical access to the dash camera and basic hardware tooling to reach the UART header. No network interaction is required, and no user interaction is involved after physical access is obtained. The vulnerability is described in detail in the CSAF advisory document.
Detection Methods for CVE-2026-79959
Indicators of Compromise
- Evidence of tamper on the dash camera enclosure, including removed screws, pry marks, or thermal damage near UART pads
- Unexpected firmware version strings or filesystem modifications observed during device audits
- Unknown processes or persistent binaries dropped into writable partitions on the camera
Detection Strategies
- Perform periodic physical inspections of fleet-deployed dash cameras to identify tamper indicators
- Compare deployed firmware hashes against the vendor-supplied reference image to detect modification
- Monitor vehicle fleet telematics systems for unexpected device reboots or configuration drift associated with the camera
Monitoring Recommendations
- Track issuance of ICS advisories and firmware releases from Botslab through the vendor site
- Log device serial numbers and firmware versions in an asset inventory to support rapid identification of affected units
- Alert on any physical access or maintenance events against vehicles that house the G980H in sensitive deployments
How to Mitigate CVE-2026-79959
Immediate Actions Required
- Treat all physical access to the dash camera as a trust boundary and restrict handling to authorized personnel
- Remove or isolate affected devices in high-sensitivity environments until the vendor publishes updated firmware
- Review supply-chain and maintenance workflows to prevent unauthorized device swaps or firmware extraction
Patch Information
No vendor patch is referenced in the NVD record or in CISA ICS Advisory ICSA-26-267-01 at the time of publication. Operators should monitor Botslab channels and the CISA advisory for firmware updates that remove or rotate the embedded credential.
Workarounds
- Apply tamper-evident seals over the camera enclosure seams and UART header to detect physical access attempts
- Store spare and decommissioned units in secured inventory to prevent firmware extraction by third parties
- Avoid distributing firmware images outside authorized maintenance channels, since image possession enables credential recovery
Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB

