Skip to main content
Vulnerability Database/CVE-2026-76664

CVE-2026-76664: HPE NonStop EXPAND Buffer Overflow Flaw

CVE-2026-76664 is a buffer overflow vulnerability in HPE NonStop EXPAND causing out-of-bounds memory operations. Attackers could exploit this to compromise system integrity. This article covers technical details, impact assessment, and mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-76664 Overview

CVE-2026-76664 is an out-of-bounds read/write vulnerability affecting HPE NonStop EXPAND. The flaw is classified under [CWE-125] (Out-of-bounds Read) and allows an attacker on an adjacent network to trigger memory access outside intended bounds. Successful exploitation can expose limited confidential data, modify limited integrity-protected content, and cause high-impact availability loss on the affected NonStop system. HPE published a security bulletin tracking the issue under reference hpesbns05148en_us. No public proof-of-concept exploit, exploitation in the wild, or CISA KEV listing has been reported for this CVE at the time of publication.

Critical Impact

An adjacent-network attacker can trigger out-of-bounds memory reads and writes in HPE NonStop EXPAND, risking information disclosure, data tampering, and service disruption on NonStop fault-tolerant systems.

Affected Products

  • HPE NonStop EXPAND (specific affected versions listed in HPE Security Bulletin hpesbns05148en_us)
  • HPE NonStop systems running vulnerable EXPAND networking subsystem builds
  • Deployments where NonStop nodes communicate over EXPAND across adjacent network segments

Discovery Timeline

  • 2026-10-15 - CVE CVE-2026-76664 published to the National Vulnerability Database
  • 2026-10-15 - Last updated in NVD database

Technical Details for CVE-2026-76664

Vulnerability Analysis

The vulnerability resides in HPE NonStop EXPAND, the networking subsystem that connects NonStop nodes into a wide-area or multi-node network. The weakness is categorized as [CWE-125] Out-of-bounds Read, with the HPE bulletin also indicating out-of-bounds write behavior. EXPAND processes network frames to route traffic between NonStop systems, and improper bounds validation during this processing lets a malformed message read or write memory outside the intended buffer region. The attack surface is limited to adjacent-network access, meaning an attacker typically needs a foothold on the same logical network segment as the EXPAND interface. HPE documents the issue in the HPE Security Bulletin, which is the authoritative source for affected release-version updates (RVUs) and remediation.

Root Cause

The root cause is missing or incomplete validation of length or offset fields in network messages handled by EXPAND. When EXPAND parses attacker-controlled fields without enforcing buffer boundaries, subsequent memory operations read or write past the end of the intended buffer. This matches the behavior described by [CWE-125] and the write component referenced in the bulletin.

Attack Vector

Exploitation requires network adjacency and no authentication or user interaction. An attacker able to deliver crafted EXPAND traffic to a vulnerable NonStop interface can trigger the out-of-bounds access. High attack complexity reflects the specialized protocol knowledge and timing conditions required. Impact is weighted toward availability, consistent with service disruption on EXPAND-connected NonStop nodes.

No verified public exploit code is available. Refer to the HPE Security Bulletin for the technical description.

Detection Methods for CVE-2026-76664

Indicators of Compromise

  • Unexpected restarts, process pair failovers, or EXPAND line handler aborts on NonStop nodes
  • EMS (Event Management Service) events indicating malformed EXPAND packets or protocol errors
  • Anomalous EXPAND frames from hosts on adjacent network segments that do not match known NonStop peers

Detection Strategies

  • Inspect EMS logs for EXPAND subsystem errors, line handler terminations, and memory access faults correlated with inbound network activity
  • Baseline normal EXPAND peer relationships and alert on EXPAND traffic originating from unauthorized sources on adjacent VLANs
  • Deploy network monitoring on segments carrying EXPAND traffic to flag malformed or oversized protocol frames

Monitoring Recommendations

  • Forward NonStop EMS and SAFEGUARD audit data to a centralized analytics platform for correlation with network telemetry
  • Monitor the integrity and uptime of EXPAND line handlers and process pairs continuously
  • Track configuration changes to EXPAND lines, SUPER paths, and access control lists on NonStop systems

How to Mitigate CVE-2026-76664

Immediate Actions Required

  • Review the HPE Security Bulletin and identify NonStop systems running affected EXPAND versions
  • Apply the HPE-provided SPR (Software Product Revision) or RVU update as listed in the bulletin
  • Restrict adjacent-network access to EXPAND interfaces to known NonStop peers only

Patch Information

HPE has released remediation guidance in Security Bulletin hpesbns05148en_us. Customers should consult the bulletin for the specific affected EXPAND SPR levels and the corresponding fixed releases. Patching should follow standard NonStop change-control procedures, including validation on non-production nodes before fleet-wide rollout.

Workarounds

  • Enforce network segmentation so EXPAND traffic traverses only trusted, isolated VLANs or dedicated interconnects
  • Apply access control lists on upstream switches and routers to permit EXPAND protocol traffic only between authorized NonStop endpoints
  • Disable or restrict unused EXPAND lines and interfaces until patches are applied
bash
# Configuration example
# Illustrative ACL concept restricting EXPAND traffic to known NonStop peers.
# Replace addresses and interface names to match your environment.
#
# Permit EXPAND traffic only between authorized NonStop nodes
access-list EXPAND-ALLOW permit ip host <nonstop-node-A> host <nonstop-node-B>
access-list EXPAND-ALLOW deny   ip any any log
#
# Apply to the interface carrying EXPAND adjacency
interface <expand-segment-interface>
  ip access-group EXPAND-ALLOW in

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.