Skip to main content
Vulnerability Database/CVE-2026-58008

CVE-2026-58008: Altera Trusted Firmware Buffer Overflow

CVE-2026-58008 is a stack-based buffer overflow in Altera Trusted Firmware on HPS that enables exploitation of memory protections. This article covers the technical details, affected versions, security impact, and mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-58008 Overview

CVE-2026-58008 is a stack-based buffer overflow [CWE-121] in Altera Trusted Firmware running on the Hard Processor System (HPS). The flaw stems from improperly configured or implemented memory protections, which attackers can exploit to corrupt the firmware stack. The issue affects Altera Trusted Firmware through version socfpga_v2.14.0. Successful exploitation requires local access and high privileges, but yields high integrity and availability impact on the firmware trust base. Because Trusted Firmware operates below the operating system, compromise undermines the hardware root of trust on affected System-on-Chip FPGA platforms.

Critical Impact

A local attacker with high privileges can corrupt stack memory in Altera Trusted Firmware on HPS, bypassing memory protections to compromise firmware integrity and availability on affected SoC FPGA devices.

Affected Products

  • Altera Trusted Firmware for SoC FPGA (socfpga)
  • Trusted Firmware on Hard Processor System (HPS)
  • All versions through socfpga_v2.14.0

Discovery Timeline

  • 2026-09-24 - CVE CVE-2026-58008 published to NVD
  • 2026-09-24 - Last updated in NVD database

Technical Details for CVE-2026-58008

Vulnerability Analysis

The vulnerability resides in Altera Trusted Firmware code that runs on the Hard Processor System (HPS) of Altera SoC FPGA devices. Trusted Firmware provides secure boot, platform initialization, and runtime secure services under the Arm Trusted Firmware-A model. A stack-based buffer overflow combined with improperly configured memory protections allows an attacker to write beyond the bounds of a stack buffer. The overflow can corrupt saved registers, return addresses, and adjacent stack data within the secure firmware context. Because the affected code executes at a privileged exception level, successful corruption bypasses operating system isolation and affects the firmware trust base directly.

Root Cause

The root cause is a classic stack buffer overflow [CWE-121] in which input length is not properly validated against the destination buffer size. The condition is amplified by memory protections, such as stack canaries, execute-never attributes, or Memory Protection Unit (MPU) regions, that are either missing or misconfigured for the vulnerable code path. Without enforced guard regions, stack corruption translates directly into control-flow or data-flow compromise.

Attack Vector

Exploitation requires local access to the HPS and high privileges, meaning the attacker must already run code at a privileged level that can invoke the vulnerable firmware interface. No user interaction is needed. An attacker who meets these preconditions can supply oversized input to the vulnerable routine to overwrite the stack and alter secure firmware execution. The resulting impact is low confidentiality loss but high integrity and availability loss within the firmware, with cascading high impact on dependent subsystem integrity and availability. See the Altera Security Advisory ASA-0006 for vendor technical details.

// No verified proof-of-concept code is available for CVE-2026-58008.
// Refer to Altera Security Advisory ASA-0006 for technical specifics.

Detection Methods for CVE-2026-58008

Indicators of Compromise

  • Unexpected resets, panics, or exception traps originating from the Trusted Firmware exception level on Altera HPS devices.
  • Secure boot measurement mismatches or Platform Configuration Register (PCR) drift on subsequent boots.
  • Anomalous Secure Monitor Call (SMC) traffic patterns from non-secure software to firmware services.

Detection Strategies

  • Enable and monitor firmware fault logging and crash dumps for stack corruption signatures such as invalid link register values.
  • Compare measured boot values against known-good references to detect tampered firmware images.
  • Audit which local accounts and processes hold privileges sufficient to invoke secure firmware services on the HPS.

Monitoring Recommendations

  • Centralize firmware and kernel logs from affected devices into a security data lake for correlation across the fleet.
  • Alert on repeated SMC failures, unexpected secure-world exceptions, or firmware watchdog resets.
  • Track administrative access to embedded management interfaces that expose HPS debug or firmware update paths.

How to Mitigate CVE-2026-58008

Immediate Actions Required

  • Inventory all deployed Altera SoC FPGA devices and identify systems running Trusted Firmware at or below socfpga_v2.14.0.
  • Restrict local and privileged access to the HPS to trusted administrators and automated workflows only.
  • Review and tighten controls over firmware update channels and debug interfaces exposed by affected hardware.

Patch Information

Refer to the Altera Security Advisory ASA-0006 for the vendor-supplied fixed firmware version and update guidance. Apply the vendor-provided Trusted Firmware update to all affected SoC FPGA platforms and re-measure secure boot state after upgrade.

Workarounds

  • Reduce the attack surface by disabling or gating unused secure firmware services exposed through SMC interfaces.
  • Enforce principle of least privilege for non-secure software that can call into Trusted Firmware.
  • Enable available hardware memory protections, including MPU regions and execute-never settings, in deployment configurations where supported.
bash
# Example: verify installed Trusted Firmware version on an Altera HPS target
# (vendor commands vary by platform; consult ASA-0006 for authoritative guidance)
strings /lib/firmware/bl31.bin | grep -i socfpga

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.