Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB
CVE-2026-20525 Overview
CVE-2026-20525 is an improper input validation flaw [CWE-617] in the MediaTek Modem firmware. The vulnerability allows a remote attacker operating a rogue base station to crash the modem of a connected user equipment (UE). Exploitation does not require authentication, user interaction, or additional execution privileges. The impact is limited to availability, resulting in denial of service on the affected device. MediaTek assigned patch identifiers MOLY01870473 and MOLY00814393 under issue ID MSV-9041.
Critical Impact
A rogue base station within radio range can trigger a modem crash on a connected UE, disrupting cellular connectivity until the device recovers or restarts.
Affected Products
- MediaTek Modem firmware (see MediaTek Security Bulletin - October 2026)
- Devices integrating affected MediaTek baseband processors
- Patch IDs: MOLY01870473 / MOLY00814393
Discovery Timeline
- 2026-10-05 - CVE-2026-20525 published to NVD
- 2026-10-06 - Last updated in NVD database
Technical Details for CVE-2026-20525
Vulnerability Analysis
The vulnerability resides in the MediaTek Modem's handling of input received over the cellular radio interface. The modem fails to properly validate attacker-controlled fields before processing them, triggering a reachable assertion or crash condition. CWE-617 (Reachable Assertion) indicates that a specific input sequence drives the modem into a state the firmware treats as unrecoverable.
Successful exploitation produces a denial of service on the affected device. Confidentiality and integrity are not impacted according to the published CVSS metrics. The modem crash can disconnect calls, interrupt data sessions, and in some implementations force a baseband restart.
The attack requires the target UE to attach to a base station controlled by the attacker. This increases practical attack complexity but is well within the capability of adversaries using software-defined radios and open-source cellular stacks.
Root Cause
The root cause is missing or insufficient validation of fields in a cellular protocol message processed by the modem. When the modem parses a malformed or unexpected value, it reaches an abort path instead of rejecting the message gracefully. MediaTek's fix is tracked under patches MOLY01870473 and MOLY00814393.
Attack Vector
The attack vector is adjacent network. An attacker operates a rogue base station using a software-defined radio and a cellular stack such as srsRAN or OpenAirInterface. When a vulnerable UE camps on this base station, the attacker transmits a crafted protocol message containing fields the modem fails to validate. Processing the message crashes the baseband.
See the MediaTek Security Bulletin - October 2026 for technical details.
Detection Methods for CVE-2026-20525
Indicators of Compromise
- Unexpected modem resets or baseband panic logs on affected devices
- Repeated loss of cellular connectivity in a localized geographic area
- Device logs referencing crashes during attach, authentication, or signaling procedures
Detection Strategies
- Monitor mobile device management (MDM) telemetry for abnormal rates of modem reboots across a device fleet
- Correlate device crash reports with location data to identify clusters consistent with a rogue base station
- Review radio measurement reports for unexpected cells with weak authentication parameters or mismatched identifiers
Monitoring Recommendations
- Collect baseband and ril (radio interface layer) logs from managed mobile endpoints where supported
- Establish a baseline for modem crash frequency and alert on statistically significant deviations
- Track patch deployment status for MediaTek bulletin fixes across the device inventory
How to Mitigate CVE-2026-20525
Immediate Actions Required
- Identify devices using affected MediaTek baseband chipsets within the environment
- Apply vendor firmware updates referencing patch IDs MOLY01870473 and MOLY00814393 as soon as OEMs publish them
- Prioritize patching for high-value users and devices operating in sensitive locations
Patch Information
MediaTek has released fixes documented in the MediaTek Security Bulletin - October 2026. Device manufacturers (OEMs) must integrate the modem patches into their firmware builds and distribute them via over-the-air updates. End users should install OEM security updates referencing the October 2026 MediaTek bulletin.
Workarounds
- Enable 5G-only or LTE-only modes where feasible to limit attach to specific radio access technologies
- Disable automatic network selection in high-risk environments and manually select trusted carriers
- For sensitive operations, restrict device use to areas with known legitimate cellular coverage
Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB

