Skip to main content
Vulnerability Database/CVE-2026-102727

CVE-2026-102727: FTP Authentication Bypass Vulnerability

CVE-2026-102727 is an authentication bypass flaw in FTP servers where passive data connections are not bound to authenticated control peers, allowing unauthorized access. This article covers technical details, impact assessment, and mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-102727 Overview

CVE-2026-102727 affects Eclipse ThreadX NetX Duo, an embedded TCP/IP networking stack widely deployed in real-time operating system environments. The vulnerability resides in the FTP server implementation, where passive-mode data connections are not bound to the IP address of the authenticated control-channel peer. An unauthenticated network attacker can race to connect to the advertised passive data port and hijack the data channel of a legitimate FTP session. The issue is classified under CWE-923: Improper Restriction of Communication Channel to Intended Endpoints.

Critical Impact

An attacker on a reachable network path can intercept file transfers or inject data into an authenticated FTP session without possessing valid credentials.

Affected Products

  • Eclipse ThreadX NetX Duo FTP server component
  • Embedded devices and firmware that link the NetX Duo FTP module
  • Downstream products bundling vulnerable NetX Duo releases

Discovery Timeline

  • 2026-09-29 - CVE-2026-102727 published to the National Vulnerability Database
  • 2026-09-29 - Last updated in NVD database

Technical Details for CVE-2026-102727

Vulnerability Analysis

The File Transfer Protocol (FTP) uses two channels: a control channel for authentication and commands, and a separate data channel for file content. In passive mode, the server opens a listening data port and communicates the port number to the client through the PASV or EPSV response. The client then initiates a second TCP connection to that port to exchange file data.

The NetX Duo FTP server accepts the first inbound connection to the passive data port without verifying that the source IP address matches the peer authenticated on the control channel. Any host that reaches the data port before the legitimate client can complete the data transfer as if it were the authenticated user. This allows an attacker to exfiltrate downloaded files, replace uploaded content, or inject data into directory listings.

Root Cause

The root cause is missing endpoint validation on the passive data socket. Under [CWE-923], the server fails to restrict the data channel to the intended endpoint. Successful exploitation still requires timing precision and user interaction on the control channel, which is reflected in the attack complexity and user-interaction requirements of the vulnerability metrics.

Attack Vector

Exploitation proceeds as follows. A victim client authenticates to the FTP server and issues a passive-mode transfer request. The server responds with a data port. An attacker who can reach that port on the network races the legitimate client to establish the TCP connection. If the attacker's SYN arrives first, the server binds the data channel to the attacker socket and processes the transfer under the victim's session context. The attack requires network reachability to the FTP data port range but does not require credentials.

See the Eclipse ThreadX NetX Duo Security Advisory GHSA-r2qx-83vg-xqx4 for authoritative technical details.

Detect Identity Attacks the Moment Authentication Fails

Singularity™ Identity surfaces credential misuse, lateral movement, and privilege escalation in real time, so you can contain the breach before it spreads.

Stop Identity Attacks

Detection Methods for CVE-2026-102727

Indicators of Compromise

  • FTP data connections originating from source IP addresses that do not match the control-channel peer for the same session
  • Unexpected file content, truncated transfers, or altered directory listings reported by FTP clients
  • Repeated short-lived TCP connections targeting the passive port range advertised by the FTP server

Detection Strategies

  • Correlate FTP control-channel authentication events with data-channel connection tuples and alert on source IP mismatches
  • Inspect network flow telemetry for concurrent connections to the same passive data port from multiple hosts
  • Deploy protocol-aware intrusion identification signatures that parse PASV and EPSV responses and validate the follow-on data connection origin

Monitoring Recommendations

  • Forward FTP server logs and network flow records to a centralized analytics platform for cross-session correlation
  • Baseline the expected client population per FTP service and alert on connections from new subnets
  • Monitor embedded device egress for FTP traffic patterns that deviate from documented device behavior

How to Mitigate CVE-2026-102727

Immediate Actions Required

  • Inventory firmware and embedded products that ship the Eclipse ThreadX NetX Duo FTP server
  • Restrict network reachability to FTP services using access control lists or firewall rules that limit source IP addresses
  • Disable the FTP server on devices where the service is not required for operations

Patch Information

Refer to the Eclipse ThreadX NetX Duo Security Advisory GHSA-r2qx-83vg-xqx4 for fixed versions and integration guidance. Downstream device vendors should rebuild firmware against the patched NetX Duo release and publish updates to affected customers.

Workarounds

  • Replace plaintext FTP with FTPS or SFTP where the platform supports it, so that data-channel hijacking cannot recover cleartext content
  • Segment FTP-enabled embedded devices onto isolated management networks to reduce the attacker population that can race the data port
  • Configure the FTP server, where supported, to use a narrow passive port range and firewall those ports to authorized client subnets only
bash
# Example: restrict FTP data ports to a known client subnet using iptables
iptables -A INPUT -p tcp --dport 21 -s 10.10.0.0/24 -j ACCEPT
iptables -A INPUT -p tcp --dport 50000:50100 -s 10.10.0.0/24 -j ACCEPT
iptables -A INPUT -p tcp --dport 21 -j DROP
iptables -A INPUT -p tcp --dport 50000:50100 -j DROP

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.