Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB
CVE-2026-102485 Overview
CVE-2026-102485 is an out-of-bounds read vulnerability [CWE-125] in the Motorola Oncore reference clock driver bundled with NTPsec ntpd before version 1.2.6. An attacker who controls the serial data stream from a connected GPS receiver can trigger the flaw by sending a crafted PPS Control (@@Gc) reply that contains an out-of-range mode byte. Successful exploitation can crash the ntpd daemon or disclose adjacent process memory. The attack requires physical access to the serial path between the GPS receiver and the host running ntpd, which limits practical exploitation to environments where the hardware channel can be influenced.
Critical Impact
Attackers with control of the GPS serial feed can crash ntpd or read process memory, disrupting authoritative time services and potentially leaking sensitive data.
Affected Products
- NTPsec ntpd versions prior to 1.2.6
- Deployments using the Motorola Oncore refclock driver
- Systems where the GPS receiver's serial data path is attacker-reachable
Discovery Timeline
- 2026-10-21 - CVE-2026-102485 published to NVD
- 2026-10-22 - Last updated in NVD database
Technical Details for CVE-2026-102485
Vulnerability Analysis
The flaw resides in the Motorola Oncore refclock driver, a component that parses binary messages from GPS receivers to discipline the system clock. When ntpd processes a PPS Control reply identified by the @@Gc message header, the driver uses a mode byte from the message to index into an internal structure. The driver does not validate that the mode byte falls within the expected range before dereferencing it. This missing bounds check allows a crafted reply to force the driver to read memory outside the intended buffer, producing either a crash or unintended data exposure through subsequent processing paths.
Root Cause
The root cause is improper validation of untrusted input from the serial channel. The parsing routine trusts the mode byte supplied by the GPS receiver without range enforcement, violating defensive parsing expectations for refclock drivers. The upstream fix in commit 22a09b3aec58831a9e4a008f3f22caa155f969c2 adds the missing validation. Further context is available in NTPsec Work Item #895.
Attack Vector
Exploitation requires an adjacent physical attack path. The adversary must be able to inject or modify bytes on the serial line between the GPS receiver and the host, or compromise the receiver firmware itself. After reaching the serial channel, the attacker sends a @@Gc PPS Control reply containing a mode byte outside the valid range. The malformed message traverses the Oncore driver's dispatch logic and triggers the out-of-bounds read, which can crash ntpd or expose memory contents in diagnostic output or subsequent packet state.
No verified public exploit code is available. Refer to the NTPsec commit for the fix diff.
Detection Methods for CVE-2026-102485
Indicators of Compromise
- Unexpected crashes or restarts of the ntpd process on hosts configured with Motorola Oncore refclocks
- Core dumps referencing the Oncore driver code path or @@Gc message handling
- Gaps in time synchronization logs correlated with GPS serial activity
- Anomalous or malformed messages observed on the GPS serial interface
Detection Strategies
- Inventory all hosts running NTPsec ntpd and flag versions earlier than 1.2.6 that enable the Oncore driver
- Monitor the ntpd process for abnormal termination and link events to the serial device file descriptor
- Capture and inspect serial traffic from GPS receivers for @@Gc replies with mode bytes outside the documented range
Monitoring Recommendations
- Forward ntpd syslog output and crash telemetry to a central log platform for correlation
- Alert on repeated ntpd restarts within short time windows on time-authoritative hosts
- Track physical access and change-control events on racks hosting GPS receivers and serial converters
How to Mitigate CVE-2026-102485
Immediate Actions Required
- Upgrade NTPsec ntpd to version 1.2.6 or later on every host using the Motorola Oncore refclock
- Audit refclock configurations and disable the Oncore driver on hosts that do not require it
- Restrict physical and logical access to GPS receivers, serial cabling, and any serial-over-IP gateways
Patch Information
The fix is included in NTPsec 1.2.6 and later. The upstream commit 22a09b3aec58831a9e4a008f3f22caa155f969c2 adds validation for the mode byte in the Oncore refclock driver. See the NTPsec commit and the tracking NTPsec Work Item #895 for details.
Workarounds
- Remove the Motorola Oncore refclock entry from ntp.conf and rely on alternative time sources until patching is complete
- Place GPS receivers and their serial links inside physically secured enclosures with tamper monitoring
- Where feasible, replace direct serial feeds with filtered intermediaries that reject malformed @@Gc messages
# Example: disable the Oncore refclock in ntp.conf until the host is patched
# Comment out any line resembling the following and restart ntpd
# refclock oncore unit 0 mode 1 flag1 1
sudo systemctl restart ntpd
Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB

