Skip to main content

CVE-2026-0993: SODOLA SL902-SWTGW124AS Buffer Overflow Flaw

CVE-2026-0993 is a buffer overflow flaw in SODOLA SL902-SWTGW124AS firmware that enables unauthenticated attackers to crash the device via malicious POST requests. This article covers technical details, affected versions, impact assessment, and mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2026-0993 Overview

CVE-2026-0993 is a buffer overflow vulnerability in SODOLA SL902-SWTGW124AS switch firmware before version 200.2.12. The embedded HTTP server fails to validate the length of the boundary parameter in multipart/form-data requests. An unauthenticated remote attacker can send a crafted POST request with an oversized Content-Type boundary value to trigger the overflow. The device becomes fully unresponsive, dropping all management access and halting traffic forwarding during its self-recovery cycle. The flaw is classified under CWE-120 (Classic Buffer Overflow).

Critical Impact

Unauthenticated attackers on the network can remotely crash the switch, cutting management access and interrupting all traffic forwarding until recovery completes.

Affected Products

  • SODOLA SL902-SWTGW124AS managed switch
  • Firmware versions prior to 200.2.12
  • Devices exposing the embedded HTTP management interface

Discovery Timeline

  • 2026-10-15 - CVE-2026-0993 published to NVD
  • 2026-10-16 - Last updated in NVD database

Technical Details for CVE-2026-0993

Vulnerability Analysis

The vulnerability resides in the multipart/form-data parser inside the switch's embedded HTTP server. When the server receives a POST request, it extracts the boundary parameter from the Content-Type header to delimit form parts. The parser copies this value into a fixed-size stack or heap buffer without enforcing length bounds. Sending a boundary value far larger than the allocated buffer corrupts adjacent memory and crashes the HTTP service and surrounding firmware components. The device then enters a self-recovery cycle during which management access and packet forwarding are unavailable. Because the parser runs before any authentication check, exploitation requires no credentials. Repeated requests can keep the switch in a continuous crash-and-recover loop. For further technical analysis, see the VulnCheck Advisory and the HML Blog Post on CVE-2026-0993.

Root Cause

The root cause is missing bounds checking on the boundary field extracted from the HTTP Content-Type header. The firmware uses an unsafe string copy pattern that trusts attacker-controlled header length, resulting in a classic buffer overflow consistent with [CWE-120].

Attack Vector

The attack vector is network-based and requires no authentication or user interaction. An attacker reachable at the switch's management IP sends a single POST request with a long boundary= value in the Content-Type header. The parser overflows its buffer and the device becomes unresponsive. No code execution has been publicly demonstrated; impact is availability only.

No verified exploit code is published. Technical details are available in the referenced advisories.

Detection Methods for CVE-2026-0993

Indicators of Compromise

  • Inbound HTTP POST requests to the switch management interface containing a Content-Type: multipart/form-data; boundary= header with an abnormally long value (hundreds of bytes or more).
  • Unexpected reboots or watchdog-triggered restarts of the SL902-SWTGW124AS device.
  • Brief but repeating outages of switched traffic correlated with HTTP activity to the management plane.

Detection Strategies

  • Deploy IDS/IPS signatures that flag HTTP requests where the boundary parameter exceeds a reasonable upper bound such as 200 bytes.
  • Correlate switch management-plane HTTP logs with device availability events and SNMP link-state changes.
  • Hunt in network telemetry for POST requests to the switch's HTTP interface originating from untrusted VLANs.

Monitoring Recommendations

  • Enable syslog forwarding from the switch to a central collector and alert on crash or reboot messages.
  • Monitor ICMP and SNMP reachability of the switch management IP with sub-minute granularity.
  • Track baseline rates of HTTP POST traffic to the management interface and alert on sudden deviations.

How to Mitigate CVE-2026-0993

Immediate Actions Required

  • Restrict access to the switch management interface to a dedicated out-of-band management VLAN or trusted admin subnet.
  • Block inbound HTTP and HTTPS to the switch from user, guest, and internet-facing network segments.
  • Inventory all SL902-SWTGW124AS units and identify those running firmware older than 200.2.12.
  • Apply the vendor firmware update as soon as it is validated in your environment.

Patch Information

SODOLA addresses the vulnerability in SL902-SWTGW124AS firmware version 200.2.12 and later. Upgrade all affected devices to this version or newer. Refer to the VulnCheck Advisory for fix confirmation details.

Workarounds

  • Place switch management interfaces behind an ACL that permits only known administrator hosts.
  • Disable the embedded HTTP management service if the device supports alternative management such as SSH or a serial console.
  • Terminate HTTP management sessions through a reverse proxy that enforces header length limits on Content-Type.
bash
# Example ACL restricting HTTP management access to an admin subnet
# Replace interface and subnet values with those used in your environment
access-list 110 permit tcp 10.10.0.0 0.0.0.255 host 192.0.2.10 eq 80
access-list 110 permit tcp 10.10.0.0 0.0.0.255 host 192.0.2.10 eq 443
access-list 110 deny   tcp any host 192.0.2.10 eq 80
access-list 110 deny   tcp any host 192.0.2.10 eq 443
access-list 110 permit ip any any

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.