Skip to main content

CVE-2025-5790: Totolink X15 Buffer Overflow Vulnerability

CVE-2025-5790 is a critical buffer overflow flaw in Totolink X15 Firmware that enables remote attackers to exploit the HTTP POST request handler. This article covers technical details, affected versions, and mitigation.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2025-5790 Overview

CVE-2025-5790 is a buffer overflow vulnerability affecting the TOTOLINK X15 router running firmware version 1.0.0-B20230714.1105. The flaw resides in the /boafrm/formIpQoS endpoint handled by the HTTP POST request handler. An attacker can manipulate the mac argument to overflow a fixed-size buffer, corrupting adjacent memory. The vulnerability is remotely exploitable over the network and requires low privileges. Public disclosure of exploitation details has already occurred, raising the probability of opportunistic attacks against exposed devices. The weakness is categorized under CWE-119 (Improper Restriction of Operations within the Bounds of a Memory Buffer).

Critical Impact

Remote attackers with low-privileged access can trigger memory corruption on the TOTOLINK X15, potentially leading to denial of service or arbitrary code execution on the router.

Affected Products

  • TOTOLINK X15 hardware device
  • TOTOLINK X15 firmware version 1.0.0-B20230714.1105
  • Deployments exposing the device web management interface to untrusted networks

Discovery Timeline

  • 2025-06-06 - CVE-2025-5790 published to the National Vulnerability Database
  • 2026-06-17 - Last updated in NVD database

Technical Details for CVE-2025-5790

Vulnerability Analysis

The vulnerability exists in the request handler for /boafrm/formIpQoS, a URI served by the embedded boa web server. The handler parses parameters submitted in HTTP POST bodies, including the mac parameter used to configure MAC-based QoS rules. The handler copies the attacker-supplied mac value into a fixed-size stack buffer without validating its length. Sending a payload longer than the destination buffer overwrites adjacent stack memory, including saved registers and return addresses on MIPS or ARM architectures typical of these routers. Successful exploitation can crash the HTTP service or redirect execution flow, resulting in remote code execution under the privileges of the web server process (commonly root on consumer routers).

Root Cause

The root cause is missing bounds checking on user-supplied input prior to a memory copy operation. The handler trusts the length of the mac string provided through the HTTP POST body and uses an unsafe string copy function such as strcpy or sprintf to transfer the data into a stack-resident buffer. This matches the classic pattern described in CWE-119.

Attack Vector

An attacker reaches the vulnerable code by submitting an HTTP POST request to /boafrm/formIpQoS on the router management interface, supplying an oversized value in the mac form field. The attack is network-reachable and does not require user interaction. Exposure increases significantly when the management interface is reachable from the WAN. See the public write-up on GitHub and VulDB entry #311338 for additional technical context.

Detection Methods for CVE-2025-5790

Indicators of Compromise

  • Unexpected restarts or crashes of the boa web server process on the TOTOLINK X15
  • HTTP POST requests to /boafrm/formIpQoS containing abnormally long mac parameter values
  • Outbound connections from the router to unknown hosts, suggesting post-exploitation implant activity
  • Modified QoS or firewall configurations that administrators did not perform

Detection Strategies

  • Inspect HTTP POST payloads targeting /boafrm/formIpQoS and flag mac field lengths that exceed a valid 17-character MAC string
  • Correlate repeated HTTP 5xx responses or TCP resets from the router management port with inbound POST traffic to the vulnerable endpoint
  • Use network intrusion detection signatures that match long non-ASCII byte sequences inside the mac parameter

Monitoring Recommendations

  • Enable logging on upstream firewalls for all inbound traffic to router management interfaces
  • Baseline normal administrative HTTP traffic patterns and alert on deviations in request size or source geography
  • Monitor DNS queries originating from router subnets for anomalies indicative of compromise

How to Mitigate CVE-2025-5790

Immediate Actions Required

  • Restrict access to the TOTOLINK X15 web management interface to trusted internal subnets only
  • Disable WAN-side remote management on affected devices
  • Rotate administrative credentials for any device that may have been exposed, since low-privileged access is required to exploit the flaw
  • Inventory TOTOLINK X15 devices running firmware 1.0.0-B20230714.1105 across the environment

Patch Information

At the time of publication, no fixed firmware release addressing CVE-2025-5790 has been identified in the available references. Monitor the TOTOLINK official website for firmware updates and apply the patched version immediately once released.

Workarounds

  • Place affected routers behind a segmentation firewall that blocks untrusted access to TCP ports used by the web management interface
  • Replace end-of-support consumer routers with vendor-supported models that receive timely security updates
  • Where feasible, deploy a reverse proxy or VPN gateway in front of management interfaces to require authenticated tunneled access

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.