Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB
CVE-2025-4729 Overview
CVE-2025-4729 is a command injection vulnerability affecting TOTOLINK A3002R and A3002RU routers running firmware version 3.0.0-B20230809.1615. The flaw resides in the HTTP POST request handler for the /boafrm/formMapDelDevice endpoint. Attackers can manipulate the macstr argument to inject arbitrary operating system commands. The issue is classified under CWE-74 as improper neutralization of special elements in output used by a downstream component. Exploitation requires only network access and low-privilege credentials, and a public disclosure describing the attack has already been released.
Critical Impact
Authenticated remote attackers can inject shell commands through the macstr parameter, potentially gaining control over the affected router and its network traffic.
Affected Products
- TOTOLINK A3002R firmware 3.0.0-B20230809.1615
- TOTOLINK A3002RU firmware 3.0.0-B20230809.1615
- TOTOLINK A3002R and A3002RU hardware devices running the vulnerable firmware
Discovery Timeline
- 2025-05-16 - CVE-2025-4729 published to the National Vulnerability Database
- 2026-06-17 - Last updated in NVD database
Technical Details for CVE-2025-4729
Vulnerability Analysis
The vulnerability sits inside the embedded web server (boa) that ships with the TOTOLINK A3002R and A3002RU firmware. The /boafrm/formMapDelDevice handler processes HTTP POST requests intended to remove a device from the router's client map. The handler reads the macstr parameter from the request body and passes it to a downstream system command without adequate sanitization. Because the input is concatenated into a shell invocation, attackers can append shell metacharacters and secondary commands. Successful exploitation runs those commands with the privileges of the web server process, which on most SOHO routers is root. This gives the attacker persistence footholds, credential theft on the LAN, and the ability to reroute or monitor traffic passing through the device.
Root Cause
The root cause is missing input validation and improper neutralization of shell metacharacters in the macstr argument. The handler assumes macstr contains only a MAC address but performs no allowlist check before invoking the underlying system call. Any request that reaches the handler and passes basic authentication can supply hostile input.
Attack Vector
Exploitation is performed remotely over HTTP against the router's management interface. An attacker crafts a POST request to /boafrm/formMapDelDevice containing a weaponized macstr value that includes shell separators such as ;, |, or backticks followed by arbitrary commands. Because many TOTOLINK deployments expose the management interface on the LAN and, in misconfigured deployments, on the WAN, the attack surface extends beyond adjacent networks. The exploit has been publicly disclosed, lowering the barrier to weaponization by opportunistic actors.
Technical write-up: CH13hh tmp_store_cc TOTOLINK notes and VulDB entry 309031.
Stop Remote Code Execution Before It Runs
Singularity™ Endpoint detects and blocks exploit attempts at machine speed, including zero-days and novel attack techniques.
Stop Exploit AttemptsDetection Methods for CVE-2025-4729
Indicators of Compromise
- HTTP POST requests to /boafrm/formMapDelDevice containing shell metacharacters (;, |, &, `, $() in the macstr parameter.
- Unexpected outbound connections initiated by the router to attacker-controlled infrastructure shortly after receiving crafted POST requests.
- New processes, cron entries, or startup scripts appearing on the device that were not present in a baseline firmware image.
- Anomalous DNS resolutions or traffic redirection originating from LAN clients whose gateway is the affected router.
Detection Strategies
- Inspect HTTP request bodies at network chokepoints for macstr values that do not conform to a strict XX:XX:XX:XX:XX:XX MAC address pattern.
- Deploy IDS signatures that match POST requests to formMapDelDevice containing non-hexadecimal characters in macstr.
- Correlate router-originated connections against known-good baselines; SOHO routers rarely initiate outbound sessions to arbitrary internet hosts.
Monitoring Recommendations
- Enable and forward router syslog to a central collector to capture authentication events and unusual command execution artifacts.
- Monitor firmware integrity by comparing running configurations and file hashes against a known-good image.
- Track administrative logins to the router web UI and alert on logins from unexpected source addresses.
How to Mitigate CVE-2025-4729
Immediate Actions Required
- Restrict access to the router management interface to trusted management VLANs and block WAN-side access to the web UI.
- Change default and shared administrative credentials on all TOTOLINK A3002R and A3002RU devices.
- Audit logs and network telemetry for POST requests to /boafrm/formMapDelDevice since the affected firmware was deployed.
- Isolate or replace devices that cannot be updated or hardened, especially those exposed to untrusted networks.
Patch Information
At the time of publication, no vendor advisory or patched firmware release for CVE-2025-4729 is listed in the referenced sources. Consult the TOTOLINK official website for firmware updates and check VulDB #309031 for status changes.
Workarounds
- Disable remote management on the WAN interface and block inbound HTTP/HTTPS to the router from untrusted networks.
- Place affected routers behind an upstream firewall that filters HTTP requests containing shell metacharacters in macstr.
- Segment vulnerable devices onto isolated network segments with no east-west access to sensitive assets.
- Where feasible, replace end-of-support TOTOLINK models with actively maintained hardware.
# Example upstream firewall rule to block WAN access to the router web UI
# Adjust ROUTER_IP and WAN_IF to match your environment
iptables -I FORWARD -i $WAN_IF -d $ROUTER_IP -p tcp --dport 80 -j DROP
iptables -I FORWARD -i $WAN_IF -d $ROUTER_IP -p tcp --dport 443 -j DROP
Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB

