Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB
CVE-2025-11618 Overview
CVE-2025-11618 is a null pointer dereference vulnerability [CWE-476] in the FreeRTOS-Plus-TCP network stack maintained by Amazon. The flaw resides in the UDP/IPv6 packet processing path, where a missing validation check fails to verify the IP version field in the packet header. An attacker on the network can send a crafted UDP/IPv6 packet with an incorrect IP version value, triggering an invalid pointer dereference in the receiving device. Only applications that enable IPv6 are affected. The issue impacts embedded and IoT devices built on FreeRTOS-Plus-TCP, and successful exploitation can crash the networking task or the device itself.
Critical Impact
A remote, low-privilege attacker on the same network can send a malformed UDP/IPv6 packet to crash FreeRTOS-based devices, resulting in denial of service for IoT and embedded workloads.
Affected Products
- Amazon FreeRTOS-Plus-TCP (versions prior to V4.3.4)
- Embedded and IoT devices using FreeRTOS-Plus-TCP with IPv6 enabled
- Forked or derivative codebases incorporating the vulnerable UDP/IPv6 handler
Discovery Timeline
- 2025-10-10 - CVE-2025-11618 published to NVD
- 2026-10-08 - Last updated in NVD database
Technical Details for CVE-2025-11618
Vulnerability Analysis
The vulnerability affects the UDP/IPv6 receive path in FreeRTOS-Plus-TCP. When the stack processes an inbound UDP packet carried over IPv6, it does not validate that the IP version field in the header matches the expected value. Because a downstream code path assumes the packet is well-formed, it dereferences a pointer derived from the mis-parsed header, which can resolve to an invalid memory location. The result is a null or invalid pointer dereference that terminates the networking task. On embedded targets without memory protection, this condition typically crashes the device and interrupts availability of connected services.
Root Cause
The root cause is a missing input validation check on the IP version field within the UDP/IPv6 processing logic. The parser trusts attacker-controlled header data without confirming that the version matches IPv6 (value 6) before using the parsed structure to compute pointers for upper-layer handling. This matches the pattern described by CWE-476: NULL Pointer Dereference.
Attack Vector
Exploitation requires network reachability to a device running FreeRTOS-Plus-TCP with IPv6 enabled. The attacker crafts a UDP/IPv6 packet that sets an incorrect value in the IP version field and sends it to any listening UDP endpoint, or to a port that the stack will process. No user interaction is required. The packet triggers the invalid dereference during receive processing, causing a denial-of-service condition on the target. The vulnerability does not provide confidentiality or integrity impact; the demonstrated outcome is loss of availability.
No verified public proof-of-concept code was available at publication. Refer to the GitHub Security Advisory GHSA-6fh9-mqxj-hmwj for technical specifics.
Detection Methods for CVE-2025-11618
Indicators of Compromise
- Unexpected crashes, resets, or watchdog-triggered reboots of FreeRTOS-based IoT or embedded devices with IPv6 enabled
- Loss of UDP/IPv6 service availability following receipt of inbound traffic from untrusted sources
- Device logs or serial console output showing faults in the FreeRTOS-Plus-TCP IP task
Detection Strategies
- Inspect network captures for UDP/IPv6 packets with malformed IP version fields that do not equal 6
- Correlate device availability loss with inbound IPv6 traffic patterns using network telemetry
- Inventory firmware builds to identify assets running FreeRTOS-Plus-TCP versions earlier than V4.3.4
Monitoring Recommendations
- Enable IPv6 flow logging on network segments that host FreeRTOS devices and alert on malformed packets
- Monitor device uptime and reboot counters for IoT fleets; sudden clusters of resets may indicate active exploitation
- Forward device syslog and watchdog events to a centralized log platform for correlation with network events
How to Mitigate CVE-2025-11618
Immediate Actions Required
- Upgrade FreeRTOS-Plus-TCP to version V4.3.4 or later across all affected devices
- Audit forked or derivative stacks and backport the upstream fix into any custom codebase
- Restrict IPv6 reachability to FreeRTOS endpoints at the network layer until patched firmware is deployed
Patch Information
Amazon released the fix in FreeRTOS-Plus-TCP V4.3.4. Full details are available in the AWS Security Bulletin AWS-2025-023 and the GitHub Security Advisory GHSA-6fh9-mqxj-hmwj. Device vendors shipping FreeRTOS-Plus-TCP must rebuild and distribute firmware incorporating the patched library.
Workarounds
- Disable IPv6 support in FreeRTOS-Plus-TCP build configuration if IPv6 is not required by the application
- Place vulnerable devices behind a firewall or L3 filter that drops UDP/IPv6 packets with invalid version fields
- Segment FreeRTOS devices onto isolated VLANs that only accept traffic from trusted hosts
# Configuration example: disable IPv6 in FreeRTOSIPConfig.h if not required
#define ipconfigUSE_IPv6 0
Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.
Sources: National Vulnerability Database, CISA KEV, Exploit-DB

