Skip to main content
Vulnerability Database/CVE-2024-57906

CVE-2024-57906: Linux Kernel Information Disclosure Vulnerability

CVE-2024-57906 is an information disclosure vulnerability in the Linux Kernel IIO ADC subsystem that may expose uninitialized data to userspace. This article covers the technical details, affected versions, and mitigation strategies.

Published:

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

CVE-2024-57906 Overview

CVE-2024-57906 is an uninitialized memory disclosure vulnerability [CWE-908] in the Linux kernel's Industrial I/O (IIO) subsystem, specifically the Texas Instruments ADS8688 analog-to-digital converter driver (drivers/iio/adc/ti-ads8688.c). The driver's triggered buffer handler allocates a local buffer array and populates it using iio_for_each_active_channel(). Inactive channel slots remain uninitialized and are copied to user space, leaking kernel stack contents. A local user with access to the IIO device can read sensitive kernel memory. The fix zero-initializes the buffer before use.

Critical Impact

Local users with access to the affected IIO ADC device can read uninitialized kernel memory, potentially exposing sensitive data from the kernel stack.

Affected Products

  • Linux kernel versions prior to the patched stable releases listed in the kernel git commits
  • Linux kernel 6.13 release candidates (rc1 through rc6)
  • Debian LTS distributions (addressed in Debian LTS advisories)

Discovery Timeline

  • 2025-01-19 - CVE-2024-57906 published to NVD
  • 2026-06-17 - Last updated in NVD database

Technical Details for CVE-2024-57906

Vulnerability Analysis

The vulnerability resides in the ti-ads8688 ADC driver's triggered buffer path. The driver declares a stack-allocated buffer array sized to hold samples for all channels plus a timestamp. During a buffer trigger event, the driver iterates only over active channels using the iio_for_each_active_channel() macro, writing fresh ADC readings into their corresponding slots.

Slots that correspond to inactive channels are never written. Because the array lives on the kernel stack and is not zero-initialized at declaration, those slots retain whatever bytes were previously present in that stack region. The entire buffer is then pushed to user space via the IIO buffer interface, exposing stale kernel data.

This class of flaw is tracked as CWE-908 (Use of Uninitialized Resource) and is a recurring pattern across IIO ADC drivers. Leaked contents can include function pointers, stack cookies, or other data useful for bypassing kernel address-space layout randomization (KASLR) or constructing follow-on exploits.

Root Cause

The root cause is a missing initialization of the stack-allocated transfer buffer prior to selective population. The driver relied on the implicit assumption that all channel slots would be overwritten, but iio_for_each_active_channel() skips disabled channels. The upstream fix adds a memset-style zero initialization so inactive slots carry deterministic zeros rather than residual stack memory.

Attack Vector

Exploitation requires local access and the CAP_SYS_RAWIO-equivalent permission to open the IIO character device for the ADS8688 device. The attacker configures the buffer to enable only a subset of channels, triggers the buffer, and reads the resulting samples. The bytes aligned to disabled channel slots contain uninitialized kernel stack memory. Repeated reads can accumulate sufficient data for information disclosure attacks. No special timing or race condition is required.

See the kernel stable commit ebe2672 for the authoritative patch content.

Detection Methods for CVE-2024-57906

Indicators of Compromise

  • Unexpected processes opening /dev/iio:deviceN nodes bound to the ti-ads8688 driver on systems where IIO ADC usage is not part of normal workloads.
  • Non-privileged or unexpected UIDs performing ioctl and read operations against IIO buffer character devices.
  • Repeated enable/disable sequences on IIO channel scan_elements sysfs entries followed by buffer reads.

Detection Strategies

  • Inventory running kernels and compare against the patched stable versions referenced in the kernel.org commits to flag unpatched hosts.
  • Audit kernel module loading events for ti_ads8688 on systems that do not legitimately use TI ADS8688 hardware.
  • Monitor access to IIO sysfs paths such as /sys/bus/iio/devices/iio:deviceN/scan_elements/ for anomalous reconfiguration patterns.

Monitoring Recommendations

  • Enable auditd rules on /dev/iio:device* and /sys/bus/iio/devices/* paths to capture open, read, and write syscalls.
  • Forward kernel version and loaded-module telemetry to a centralized SIEM for vulnerability correlation.
  • Alert on local accounts gaining membership in groups that grant access to IIO device nodes.

How to Mitigate CVE-2024-57906

Immediate Actions Required

  • Apply the stable kernel update containing the fix from the kernel.org commits linked in the vendor advisories.
  • On Debian LTS systems, install the kernel packages referenced in the Debian LTS Announcement #1 and Debian LTS Announcement #2.
  • Restrict access to IIO device nodes to trusted service accounts only.

Patch Information

The upstream fix initializes the local transfer buffer to zero before populating active channel samples. Patched commits are published across multiple stable branches, including 1c80a09, 2a7377c, 3bf8d1e, 455df95, 485570e, aae9673, and ebe2672. Rebuild and reboot into the patched kernel to activate the fix.

Workarounds

  • Blacklist the ti_ads8688 module on systems that do not require ADS8688 hardware support by adding blacklist ti_ads8688 under /etc/modprobe.d/.
  • Tighten permissions on /dev/iio:device* nodes using udev rules so only privileged service users can open them.
  • Where feasible, disable the IIO subsystem entirely in custom kernel builds for workloads that do not require industrial sensor telemetry.
bash
# Configuration example: blacklist the vulnerable driver
echo "blacklist ti_ads8688" | sudo tee /etc/modprobe.d/blacklist-ti-ads8688.conf
sudo rmmod ti_ads8688 2>/dev/null || true
sudo update-initramfs -u

Disclaimer: This content was generated using AI. While we strive for accuracy, please verify critical information with official sources.

Sources: National Vulnerability Database, CISA KEV, Exploit-DB

Experience the Most Advanced Cybersecurity Platform

See how the world’s most intelligent, autonomous cybersecurity platform can protect your organization today and into the future.